Chapter 432 War Knife
·
Niao Shi Lang
Chapter 432 War Knife
Since the shape of the long knife is very suitable, Jiang Cheng decided to use the long knife as the shape of a weapon.
After determining the shape of the weapon, it's time to consider the material.
Of course, the destructive power of weapons is also a very important thing.
If you simply forge a long knife, it will be impossible to break through the defense of the humanoid armor.
If the destructive power is not enough, it will be like scratching an itch in front of the humanoid armor.
No matter how sharp an ordinary cold weapon is made, it is difficult to break through the defense of the humanoid armor.
This problem is a bit tricky, and even Jiang Cheng can't solve it very well.
After all, cold weapons are not like firearms. Things that can improve some power can only start from the shape and material.
The defensive power of the humanoid armor can't be imitated by ordinary firearms, let alone cold weapons.
It is very difficult for the destructive power of the long knife to break through the defense of the humanoid armor.
If others were to study it, they would probably be dumbfounded.
However, such a thorny question will not trouble Jiang Cheng, he has a lot of ways to break through the limitation of cold weapons' killing power.
In the end, Jiang Cheng decided on the weapon manufacturing plan, which is to add something to the long knife to increase the destructive power of the weapon.
Since simple cold weapons cannot achieve such destructive power, then add some additional technologies to make the destructive power of cold weapons reach a sufficient level
The technology Jiang Cheng is going to use is plasma technology. He plans to attach plasma to the long knife to eventually enhance the destructive power of the long knife.
Plasma can cut through many objects, and the cutting force can even break through steel.
But ordinary plasma can't break through the defense of the humanoid armor. After all, the hardness of Jing's armor far exceeds that of steel, and at this time some flexible means are needed.
When the frequency of the plasma is increased to the limit, it can cut very hard objects, even armor shells can be damaged.
After half a day of research and design, Jiang Cheng finally solved all the problems and determined what kind of close combat weapon to make.
After deciding on the final design, Jiang Cheng started to make the ring. A few days later, Jiang Cheng looked at the long knife in front of him and smiled with satisfaction.
The long knife in front of him is the result of his hard work these days, but the hard work is worth it in the end.
This long knife was named by Jiang Cheng as "~High Frequency Plasma War Knife, its shape and weight are the optimal results after simulation.
The main body of the long knife is made of gold and titanium, which is full of streamlines as a whole.
Jiang Cheng pressed lightly on the handle of the knife, and the long knife vibrated slightly, and then made a soft roar.
Immediately afterwards, a blue glow appeared on the blade, enveloping the entire blade.
These blue rays of light are high-frequency plasmas, although they just emit blue rays of light.
Any object that comes close to those blue lights will be cut mercilessly.
After putting away the long knife, Jiang Cheng returned to the base again, and he was going to let the fungus test the power of the long knife.
On the proving ground, the soldier from last time was holding a long knife in his hand.
After he firmly gripped the handle of the knife, a blue color appeared on the surface of the entire long knife.
Then he firmly held the long knife, and quickly chopped a huge piece of steel in front of him. The height of the steel was more than 10 meters, like a hill.
After a Semang flashed past, the huge piece of steel was cut into two halves.
After cutting off the huge steel, the soldier put away his long knife and walked back to the sidelines.
What a good knife!" After the soldier came over, he said happily to Jiang Cheng.
"Of course it's a good knife. This knife is called High Frequency Plasma Warblade. I hope you like it." Jiang Cheng looked at the soldier in front of him and said calmly.
The things that Jiang Cheng took out are of course good!
The test results of the Takasu Plasma Warblade have satisfied all the staff members.
This kind of close combat weapon is not only powerful, but also not very heavy, making it very convenient to carry iron armor.
After reading the test results, the fungus officially determined the weapon of the Steel Iron Armor and the main method of operation.
The main weapon is the Gauss rifle named "Gauss Rifle", and it is equipped with a Takabe plasma blade.
In this way, when the number of people is far away, the steel hand can use the Gauss rifle to suppress the number of people.
And when several people get close, they can take out the high plasma knife and turn to the opponent for close-up.
Such a weapon configuration with far and near is very reasonable.
It fully takes into account various operating environments, and basically meets all fighting needs.
With these two weapons, the Steel Smile Armor is like a mounted tiger, and there is nothing more to stop them.
After deciding on the weapon configuration, Yan Guo immediately started the production of Xi Zhang.
Now more than 1000 iron armors have been accumulated, and there are no weapons for this year.
Without weapons, there is no way to carry out daily training. After all, many trainings require weapons to match the platform.
It doesn't mean that it is enough to have enough steel armor and strengthened soldiers.
If the armored troops of the Iron Academy want to form enough combat effectiveness, they still need hard training.
Right now, Yan Kingdom only has one sample of each weapon, which is far from meeting the demand for a thousand weapons.
Jiang Cheng didn't mean to make a second one, but just handed over the manufacturing technology to Jun Fang.
It's not that Jiang Cheng doesn't want to have all these technologies in his own hands, but the manufacture of such weapons is not something that private companies can participate in.
Yan country's gun control is very strict, and other companies are not allowed to produce weapons and ammunition except for the bacteria.
Not to mention things like Gauss rifles and high-frequency plasma war blades.
Although he can't let his own factory produce, Jiang Cheng has nothing to regret.
This kind of thing is very troublesome to produce, and there are too many things involved.
Jiang Cheng didn't have the energy to argue with those departments, so he might as well just hand over the technology to the fungus.
Besides, even if I can produce it myself, I'm afraid I won't be able to make much money from it.
Even Jiang Cheng himself would be ashamed if the price of selling it to the fungus was too high.
Anyway, this project is personally inquired by the big leader, and the head of the number knows all the specific matters.
Jiang Cheng's contribution to this matter was noticed by Junfang and Yan Guo's top management.
After completing the work he was responsible for, Jiang Cheng was not afraid that he would not get enough benefits.
In the future, Jiang Cheng will have a way to get compensation from the state, not to mention the benefits.
At least because of Jiang Cheng's high-level relationship with Yanguo Junfang, no one can touch him on Yanguo's chassis.
(End of this chapter)
Since the shape of the long knife is very suitable, Jiang Cheng decided to use the long knife as the shape of a weapon.
After determining the shape of the weapon, it's time to consider the material.
Of course, the destructive power of weapons is also a very important thing.
If you simply forge a long knife, it will be impossible to break through the defense of the humanoid armor.
If the destructive power is not enough, it will be like scratching an itch in front of the humanoid armor.
No matter how sharp an ordinary cold weapon is made, it is difficult to break through the defense of the humanoid armor.
This problem is a bit tricky, and even Jiang Cheng can't solve it very well.
After all, cold weapons are not like firearms. Things that can improve some power can only start from the shape and material.
The defensive power of the humanoid armor can't be imitated by ordinary firearms, let alone cold weapons.
It is very difficult for the destructive power of the long knife to break through the defense of the humanoid armor.
If others were to study it, they would probably be dumbfounded.
However, such a thorny question will not trouble Jiang Cheng, he has a lot of ways to break through the limitation of cold weapons' killing power.
In the end, Jiang Cheng decided on the weapon manufacturing plan, which is to add something to the long knife to increase the destructive power of the weapon.
Since simple cold weapons cannot achieve such destructive power, then add some additional technologies to make the destructive power of cold weapons reach a sufficient level
The technology Jiang Cheng is going to use is plasma technology. He plans to attach plasma to the long knife to eventually enhance the destructive power of the long knife.
Plasma can cut through many objects, and the cutting force can even break through steel.
But ordinary plasma can't break through the defense of the humanoid armor. After all, the hardness of Jing's armor far exceeds that of steel, and at this time some flexible means are needed.
When the frequency of the plasma is increased to the limit, it can cut very hard objects, even armor shells can be damaged.
After half a day of research and design, Jiang Cheng finally solved all the problems and determined what kind of close combat weapon to make.
After deciding on the final design, Jiang Cheng started to make the ring. A few days later, Jiang Cheng looked at the long knife in front of him and smiled with satisfaction.
The long knife in front of him is the result of his hard work these days, but the hard work is worth it in the end.
This long knife was named by Jiang Cheng as "~High Frequency Plasma War Knife, its shape and weight are the optimal results after simulation.
The main body of the long knife is made of gold and titanium, which is full of streamlines as a whole.
Jiang Cheng pressed lightly on the handle of the knife, and the long knife vibrated slightly, and then made a soft roar.
Immediately afterwards, a blue glow appeared on the blade, enveloping the entire blade.
These blue rays of light are high-frequency plasmas, although they just emit blue rays of light.
Any object that comes close to those blue lights will be cut mercilessly.
After putting away the long knife, Jiang Cheng returned to the base again, and he was going to let the fungus test the power of the long knife.
On the proving ground, the soldier from last time was holding a long knife in his hand.
After he firmly gripped the handle of the knife, a blue color appeared on the surface of the entire long knife.
Then he firmly held the long knife, and quickly chopped a huge piece of steel in front of him. The height of the steel was more than 10 meters, like a hill.
After a Semang flashed past, the huge piece of steel was cut into two halves.
After cutting off the huge steel, the soldier put away his long knife and walked back to the sidelines.
What a good knife!" After the soldier came over, he said happily to Jiang Cheng.
"Of course it's a good knife. This knife is called High Frequency Plasma Warblade. I hope you like it." Jiang Cheng looked at the soldier in front of him and said calmly.
The things that Jiang Cheng took out are of course good!
The test results of the Takasu Plasma Warblade have satisfied all the staff members.
This kind of close combat weapon is not only powerful, but also not very heavy, making it very convenient to carry iron armor.
After reading the test results, the fungus officially determined the weapon of the Steel Iron Armor and the main method of operation.
The main weapon is the Gauss rifle named "Gauss Rifle", and it is equipped with a Takabe plasma blade.
In this way, when the number of people is far away, the steel hand can use the Gauss rifle to suppress the number of people.
And when several people get close, they can take out the high plasma knife and turn to the opponent for close-up.
Such a weapon configuration with far and near is very reasonable.
It fully takes into account various operating environments, and basically meets all fighting needs.
With these two weapons, the Steel Smile Armor is like a mounted tiger, and there is nothing more to stop them.
After deciding on the weapon configuration, Yan Guo immediately started the production of Xi Zhang.
Now more than 1000 iron armors have been accumulated, and there are no weapons for this year.
Without weapons, there is no way to carry out daily training. After all, many trainings require weapons to match the platform.
It doesn't mean that it is enough to have enough steel armor and strengthened soldiers.
If the armored troops of the Iron Academy want to form enough combat effectiveness, they still need hard training.
Right now, Yan Kingdom only has one sample of each weapon, which is far from meeting the demand for a thousand weapons.
Jiang Cheng didn't mean to make a second one, but just handed over the manufacturing technology to Jun Fang.
It's not that Jiang Cheng doesn't want to have all these technologies in his own hands, but the manufacture of such weapons is not something that private companies can participate in.
Yan country's gun control is very strict, and other companies are not allowed to produce weapons and ammunition except for the bacteria.
Not to mention things like Gauss rifles and high-frequency plasma war blades.
Although he can't let his own factory produce, Jiang Cheng has nothing to regret.
This kind of thing is very troublesome to produce, and there are too many things involved.
Jiang Cheng didn't have the energy to argue with those departments, so he might as well just hand over the technology to the fungus.
Besides, even if I can produce it myself, I'm afraid I won't be able to make much money from it.
Even Jiang Cheng himself would be ashamed if the price of selling it to the fungus was too high.
Anyway, this project is personally inquired by the big leader, and the head of the number knows all the specific matters.
Jiang Cheng's contribution to this matter was noticed by Junfang and Yan Guo's top management.
After completing the work he was responsible for, Jiang Cheng was not afraid that he would not get enough benefits.
In the future, Jiang Cheng will have a way to get compensation from the state, not to mention the benefits.
At least because of Jiang Cheng's high-level relationship with Yanguo Junfang, no one can touch him on Yanguo's chassis.
(End of this chapter)
