Chapter 443 Hologram
·
Niao Shi Lang
Chapter 443 Hologram
But if you leave that place, you can't do this kind of operation.
Jiang Cheng wanted much more than this. He wanted the entire laboratory to be able to perform holographic projections.
In this way, no matter where Jiang Cheng goes, as long as he is still in the fan country of the laboratory, he can let Lucy project the relevant face anytime and anywhere.
If this can be achieved, then Jiang Cheng's laboratory will be even more high-end than Tony Stark's laboratory.
In other respects, Jiang Cheng's conceived experiment is already much better than the one in the movie.
Many of the technologies used in it are not in the movie, at least superconducting materials have not been seen in this movie.
As long as Jiang Cheng adds holographic projection technology to the laboratory, Jiang Cheng will far surpass Tony Stark, the genuine Iron Man, in terms of the laboratory.
Thinking of this, Jiang Cheng became a little excited. Being able to complete the fantasy things in the movie with his own hands, this sense of accomplishment is unimaginable for ordinary people.
If it can surpass the protagonist in the movie, it will be even more powerful.
However, to achieve this goal, Jiang Cheng still needs more research. It seems that Jiang Cheng is going to enter the mode of technical nerd again.
Jiang Cheng had only been wandering around for a few days, and he was about to return to the laboratory and get up.
This time, he plans to thoroughly complete the relevant research and let the construction of the new personal laboratory begin immediately.
Now Jiang Cheng can't wait to see his new laboratory, and thinking about that scene makes Jiang Cheng feel excited.
Now that the goal was set, Jiang Cheng immediately left the company and went home directly.
Continuing to hang around in the company is just a waste of time. Jiang Cheng is far less interested in doing research in the laboratory.
Back home, after Jiang Cheng greeted the twin sisters, he immediately went into the laboratory.
Holographic projection technology has already begun to be studied on the earth, and the virtual singer "Hatsune Miku" in the island country is such a product.
"Hatsune Miku", the virtual character, was still holding a concert in reality.
Let "Hatsune Miku", which only exists in the virtual world, appear in reality.
This kind of concert can be said to have crossed the barriers of dimensions, allowing two-dimensional characters to appear in the three-dimensional world.
That concert used holographic projection technology to project "Hatsune Miku" onto the stage, and then let her move through computer control.
However, in the "Hatsune Miku" concert at that time, the technology used was not the real holographic projection technology.
That's just projecting the image of "Hatsune Miku" onto a plane through the equipment.
If you looked at it from the side at that time, you could see that it was just a one-layer picture, but the picture was relatively real, but it was not a holographic projection technology.
Since the holographic projection technology has the word "holographic", it means that at least it can be regarded as a true three-dimensional stereo.Moreover, a three-dimensional picture also needs internal structure and layers.
In other words, holographic projection must project real characters, so that you can see them from any angle.
Not only can it be seen on the outside, but also the internal composition of the character must be real. The internal organs and blood of the character must all exist.In other words, if you want to see it, you must be able to see the anatomical map of the projected character.
Not only can you see it, but you can also control it at will, zoom in and out, and display the internal structure.
These functions are very important to Jiang Cheng. During the experiment, Jiang Cheng does not just look at the surface of the object.
He also needs to be able to see the detailed internal structure, and the specific composition method, and even be able to freely manipulate and decompose and combine at will.
This kind of technology is what Jiang Cheng really wants, the technology that can help his experiments.
Only in this way can it be regarded as the real holographic projection technology, and the current ones are all just immature technologies, and there is still a long way to go from the real holographic projection technology.
Another key issue is the projection equipment. At the "Hatsune Miku" concert at that time, the projection equipment was not small.
If it was like that, Jiang Cheng would not be able to use it at all. The equipment alone would take up a lot of space.
What he needs is that every place in the laboratory can be projected. If that is the case, huge equipment will not be installed everywhere.
If you really want to do this, then Jiang Cheng's laboratory will not be used, there is no other space available, and projection equipment will be filled everywhere.
In the "Iron Man" movie, Tony Stark can only perform holographic projection on the test bench, which is limited by the projection equipment.
Tony Stark can only follow the projection equipment on the test bench, so only that small place can be used.
What Jiang Cheng has to do now is to minimize the projection equipment as much as possible. Only in this way can he be satisfied with the entire laboratory and allow him to use projection technology anywhere in the laboratory.
This problem is not easy to solve. After all, people as smart as Tony Stark have not achieved it, so they can only use experiments honestly. But Jiang Cheng is not Tony Stark, at least he still has an advantage in terms of IQ. Yes, he is much smarter than these Iron Men.
What's more, Jiang Cheng's soul comes from a more advanced world, and he has a lot of technology accumulation, which can enable him to achieve this goal.
The first thing Jiang Cheng needs to do is to implement holographic projection technology. If he doesn't even have this technology, then miniaturization is out of the question.
Simple holographic projection technology is not difficult for Jiang Cheng. After spending two days in the laboratory, Jiang Cheng completed the holographic projection technology.
Now Jiang Cheng is standing in the laboratory, looking at a little girl who appears in mid-air.
This little girl should have short blue hair and blue eyes, and she is wearing a black and white maid outfit, making her look very cute.
The little girl that appeared in mid-air was Lucy's holographic projection.
This projection is much more real than the "Hatsune Miku". If you don't know it, you will think it is a real little girl.
At least from the perspective of the human naked eye, it is impossible to tell whether the projection is real or not.
Jiang Cheng has now produced a holographic projection device, so he experimented with the effect and asked Lucy to project her own image into the air.
Seeing the fake girl in front of him, Jiang Cheng nodded in satisfaction.
Jiang Cheng was quite satisfied with the manufactured equipment, which had met his requirements from the effect point of view.
(End of this chapter)
But if you leave that place, you can't do this kind of operation.
Jiang Cheng wanted much more than this. He wanted the entire laboratory to be able to perform holographic projections.
In this way, no matter where Jiang Cheng goes, as long as he is still in the fan country of the laboratory, he can let Lucy project the relevant face anytime and anywhere.
If this can be achieved, then Jiang Cheng's laboratory will be even more high-end than Tony Stark's laboratory.
In other respects, Jiang Cheng's conceived experiment is already much better than the one in the movie.
Many of the technologies used in it are not in the movie, at least superconducting materials have not been seen in this movie.
As long as Jiang Cheng adds holographic projection technology to the laboratory, Jiang Cheng will far surpass Tony Stark, the genuine Iron Man, in terms of the laboratory.
Thinking of this, Jiang Cheng became a little excited. Being able to complete the fantasy things in the movie with his own hands, this sense of accomplishment is unimaginable for ordinary people.
If it can surpass the protagonist in the movie, it will be even more powerful.
However, to achieve this goal, Jiang Cheng still needs more research. It seems that Jiang Cheng is going to enter the mode of technical nerd again.
Jiang Cheng had only been wandering around for a few days, and he was about to return to the laboratory and get up.
This time, he plans to thoroughly complete the relevant research and let the construction of the new personal laboratory begin immediately.
Now Jiang Cheng can't wait to see his new laboratory, and thinking about that scene makes Jiang Cheng feel excited.
Now that the goal was set, Jiang Cheng immediately left the company and went home directly.
Continuing to hang around in the company is just a waste of time. Jiang Cheng is far less interested in doing research in the laboratory.
Back home, after Jiang Cheng greeted the twin sisters, he immediately went into the laboratory.
Holographic projection technology has already begun to be studied on the earth, and the virtual singer "Hatsune Miku" in the island country is such a product.
"Hatsune Miku", the virtual character, was still holding a concert in reality.
Let "Hatsune Miku", which only exists in the virtual world, appear in reality.
This kind of concert can be said to have crossed the barriers of dimensions, allowing two-dimensional characters to appear in the three-dimensional world.
That concert used holographic projection technology to project "Hatsune Miku" onto the stage, and then let her move through computer control.
However, in the "Hatsune Miku" concert at that time, the technology used was not the real holographic projection technology.
That's just projecting the image of "Hatsune Miku" onto a plane through the equipment.
If you looked at it from the side at that time, you could see that it was just a one-layer picture, but the picture was relatively real, but it was not a holographic projection technology.
Since the holographic projection technology has the word "holographic", it means that at least it can be regarded as a true three-dimensional stereo.Moreover, a three-dimensional picture also needs internal structure and layers.
In other words, holographic projection must project real characters, so that you can see them from any angle.
Not only can it be seen on the outside, but also the internal composition of the character must be real. The internal organs and blood of the character must all exist.In other words, if you want to see it, you must be able to see the anatomical map of the projected character.
Not only can you see it, but you can also control it at will, zoom in and out, and display the internal structure.
These functions are very important to Jiang Cheng. During the experiment, Jiang Cheng does not just look at the surface of the object.
He also needs to be able to see the detailed internal structure, and the specific composition method, and even be able to freely manipulate and decompose and combine at will.
This kind of technology is what Jiang Cheng really wants, the technology that can help his experiments.
Only in this way can it be regarded as the real holographic projection technology, and the current ones are all just immature technologies, and there is still a long way to go from the real holographic projection technology.
Another key issue is the projection equipment. At the "Hatsune Miku" concert at that time, the projection equipment was not small.
If it was like that, Jiang Cheng would not be able to use it at all. The equipment alone would take up a lot of space.
What he needs is that every place in the laboratory can be projected. If that is the case, huge equipment will not be installed everywhere.
If you really want to do this, then Jiang Cheng's laboratory will not be used, there is no other space available, and projection equipment will be filled everywhere.
In the "Iron Man" movie, Tony Stark can only perform holographic projection on the test bench, which is limited by the projection equipment.
Tony Stark can only follow the projection equipment on the test bench, so only that small place can be used.
What Jiang Cheng has to do now is to minimize the projection equipment as much as possible. Only in this way can he be satisfied with the entire laboratory and allow him to use projection technology anywhere in the laboratory.
This problem is not easy to solve. After all, people as smart as Tony Stark have not achieved it, so they can only use experiments honestly. But Jiang Cheng is not Tony Stark, at least he still has an advantage in terms of IQ. Yes, he is much smarter than these Iron Men.
What's more, Jiang Cheng's soul comes from a more advanced world, and he has a lot of technology accumulation, which can enable him to achieve this goal.
The first thing Jiang Cheng needs to do is to implement holographic projection technology. If he doesn't even have this technology, then miniaturization is out of the question.
Simple holographic projection technology is not difficult for Jiang Cheng. After spending two days in the laboratory, Jiang Cheng completed the holographic projection technology.
Now Jiang Cheng is standing in the laboratory, looking at a little girl who appears in mid-air.
This little girl should have short blue hair and blue eyes, and she is wearing a black and white maid outfit, making her look very cute.
The little girl that appeared in mid-air was Lucy's holographic projection.
This projection is much more real than the "Hatsune Miku". If you don't know it, you will think it is a real little girl.
At least from the perspective of the human naked eye, it is impossible to tell whether the projection is real or not.
Jiang Cheng has now produced a holographic projection device, so he experimented with the effect and asked Lucy to project her own image into the air.
Seeing the fake girl in front of him, Jiang Cheng nodded in satisfaction.
Jiang Cheng was quite satisfied with the manufactured equipment, which had met his requirements from the effect point of view.
(End of this chapter)
