Chapter 448 A Brand New Road
·
Niao Shi Lang
Chapter 448 A Brand New Road
It is impossible for you to install a camera at every angle on the shooting site. The cost of such shooting is too high.
Even if you are rich enough and have a big movie budget, you are really rich and powerful and use a lot of cameras to shoot at the same time, and shoot all the pictures from different angles.
But this still can't achieve real holographic shooting, because the pictures taken in this way are separated plane pictures.
However, holographic photography requires three-dimensional images, and this gap in dimensions cannot be resolved at all. Even Jiang Cheng cannot change this boundary.
Therefore, the problem of holographic shooting can only be solved by fundamentally changing the shooting method and completely abandoning the traditional camera.
Jiang Cheng plans to use a brand new technology this time to bypass the limitation of dimensions and achieve the purpose of holographic photography.
A traditional camera captures light through a lens, and it is difficult to record all the images because the light travels around.
Since light cannot be recorded three-dimensionally, as long as the problem of light is bypassed, holographic photography may be completed.
Jiang Cheng is going to completely give up the direction of the light, and not use the light to capture the picture.
In this way, all the problems have been solved perfectly, and another brand new path has been opened.
But since then, a new problem has emerged. Everyone knows that all movies, TV shows or photos are achieved by recording the target light to achieve the final product.
If the light is removed, then these image products will not exist completely, and there will be no shooting technology.
After all, light is the basis for human beings to see everything. Without any light, human eyes can only see darkness.
If humans can't see it, then holography is just a joke.
It is very difficult to shoot around the light.
However, Jiang Cheng is not afraid of such difficulties. For him, there are many ways to solve this problem.
On the current earth, shooting without light may be just a fantasy.
However, in Jiang Cheng's previous life, the shooting had long since left light, and many kinds of machines for recording images had all given up the outdated way of collecting light.
That's right, shooting with light is a very backward technology, and there will inevitably be distortions in the process of light transmission.
Even a slight impact can change the light and thus the final picture.
No matter how high-resolution camera you use, the pictures captured are somewhat different from the real ones.This is a problem posed by the nature of light that simply cannot be solved by improving technology.
Only by completely giving up the light can we get the most realistic picture.In Jiang Cheng's previous life, the new shooting method has long been popularized, and this method is to record the picture through scanning. Scanning records the painting from the essence of the object through a special magnetic field.
The molecular structure of the object is touched by a special magnetic field, and then the picture of the object is reorganized, and finally the most realistic round surface of the object is obtained.
To put it simply, the amount passes through special segments, directly draws the object itself, and then composes the final picture.
And this way of scanning is to directly scan the whole object, so there is no problem of two groups and three dimensions.
The scanned image is directly on the holographic surface of Xingsan, and there is no need for other technical processing at all to get a holographic shot.
effect.
Moreover, the scanned picture is definitely more real than the picture taken by the camera, and there will be no gap with the real object.
Since Jiang Cheng already has a research direction, the research this time is not very difficult.
After a few days, Jiang Cheng finished all the work, and a machine taller than a person appeared on the laboratory table.
This machine is a machine capable of holographic photography, and Jiang Cheng named it a "holographic scanning camera".
The holographic scanning camera perfectly solves the problem of holographic shooting, and there are many advantages.
This kind of machine is very convenient to use, as long as it is placed on the shooting site, after setting the relevant parameters, it can automatically record the scene.
And there is no need to consider the problem of what lens, because all the pictures have been shot from any angle.
One of the most important advantages is that this machine can completely ignore the environment of the shooting scene.
Even if you are shooting in a dark room, you can take pictures in the room without turning on the lights, and there will be no difference from when there is sufficient light.
Because the machine doesn't operate with light, it doesn't need enough light to be able to shoot.
In this way, it is very convenient to shoot movies. You don’t need to consider the influence of lighting and natural light. Even if it is raining, you can still shoot the effect of sunny days.
After researching the technology of holographic photography, Jiang Cheng was finally able to breathe a sigh of relief.
During this period of time, he was constantly busy, and he didn't even have time to take a break.
From the beginning of researching holographic projection technology, to supervising the construction of the laboratory, and finally starting to study holographic shooting technology by accident, there was no rest time at all.
After working continuously like this, if it weren't for Jiang Cheng's strong physical fitness, he wouldn't be able to persist at all.
Now that all the things at hand have been completed, Jiang Cheng can finally take a rest.
After completing the holographic scanning camera, Jiang Cheng was not busy releasing the technology to let everyone know that he had succeeded.
He was going to hide it for a while, so that those who were waiting could continue for a while.
Jiang Cheng did this not to make those people anxious, but to have his own ideas.
He wants to make this technology an instant hit, appear in the public's sight in a shining way, and let everyone deeply remember this technology.
This is mainly to pave the way for future things, he developed this technology not just to satisfy everyone's wishes.
Since he has spent such a long time, it is only natural to get enough profit from it.
If he still can't make money after spending so much effort, Jiang Cheng would not do such a loss-making thing.
Jiang Cheng wanted to use holographic photography and holographic projection technology to earn a lot of money.
At present, his target is the film market, and there is no place more suitable for holographic technology than this.
Jiang Cheng believes that as long as holographic technology enters the film market, traditional films can be thrown into the trash.
Since you want to make money through this technology, you must demonstrate the potential of holographic technology.
(End of this chapter)
It is impossible for you to install a camera at every angle on the shooting site. The cost of such shooting is too high.
Even if you are rich enough and have a big movie budget, you are really rich and powerful and use a lot of cameras to shoot at the same time, and shoot all the pictures from different angles.
But this still can't achieve real holographic shooting, because the pictures taken in this way are separated plane pictures.
However, holographic photography requires three-dimensional images, and this gap in dimensions cannot be resolved at all. Even Jiang Cheng cannot change this boundary.
Therefore, the problem of holographic shooting can only be solved by fundamentally changing the shooting method and completely abandoning the traditional camera.
Jiang Cheng plans to use a brand new technology this time to bypass the limitation of dimensions and achieve the purpose of holographic photography.
A traditional camera captures light through a lens, and it is difficult to record all the images because the light travels around.
Since light cannot be recorded three-dimensionally, as long as the problem of light is bypassed, holographic photography may be completed.
Jiang Cheng is going to completely give up the direction of the light, and not use the light to capture the picture.
In this way, all the problems have been solved perfectly, and another brand new path has been opened.
But since then, a new problem has emerged. Everyone knows that all movies, TV shows or photos are achieved by recording the target light to achieve the final product.
If the light is removed, then these image products will not exist completely, and there will be no shooting technology.
After all, light is the basis for human beings to see everything. Without any light, human eyes can only see darkness.
If humans can't see it, then holography is just a joke.
It is very difficult to shoot around the light.
However, Jiang Cheng is not afraid of such difficulties. For him, there are many ways to solve this problem.
On the current earth, shooting without light may be just a fantasy.
However, in Jiang Cheng's previous life, the shooting had long since left light, and many kinds of machines for recording images had all given up the outdated way of collecting light.
That's right, shooting with light is a very backward technology, and there will inevitably be distortions in the process of light transmission.
Even a slight impact can change the light and thus the final picture.
No matter how high-resolution camera you use, the pictures captured are somewhat different from the real ones.This is a problem posed by the nature of light that simply cannot be solved by improving technology.
Only by completely giving up the light can we get the most realistic picture.In Jiang Cheng's previous life, the new shooting method has long been popularized, and this method is to record the picture through scanning. Scanning records the painting from the essence of the object through a special magnetic field.
The molecular structure of the object is touched by a special magnetic field, and then the picture of the object is reorganized, and finally the most realistic round surface of the object is obtained.
To put it simply, the amount passes through special segments, directly draws the object itself, and then composes the final picture.
And this way of scanning is to directly scan the whole object, so there is no problem of two groups and three dimensions.
The scanned image is directly on the holographic surface of Xingsan, and there is no need for other technical processing at all to get a holographic shot.
effect.
Moreover, the scanned picture is definitely more real than the picture taken by the camera, and there will be no gap with the real object.
Since Jiang Cheng already has a research direction, the research this time is not very difficult.
After a few days, Jiang Cheng finished all the work, and a machine taller than a person appeared on the laboratory table.
This machine is a machine capable of holographic photography, and Jiang Cheng named it a "holographic scanning camera".
The holographic scanning camera perfectly solves the problem of holographic shooting, and there are many advantages.
This kind of machine is very convenient to use, as long as it is placed on the shooting site, after setting the relevant parameters, it can automatically record the scene.
And there is no need to consider the problem of what lens, because all the pictures have been shot from any angle.
One of the most important advantages is that this machine can completely ignore the environment of the shooting scene.
Even if you are shooting in a dark room, you can take pictures in the room without turning on the lights, and there will be no difference from when there is sufficient light.
Because the machine doesn't operate with light, it doesn't need enough light to be able to shoot.
In this way, it is very convenient to shoot movies. You don’t need to consider the influence of lighting and natural light. Even if it is raining, you can still shoot the effect of sunny days.
After researching the technology of holographic photography, Jiang Cheng was finally able to breathe a sigh of relief.
During this period of time, he was constantly busy, and he didn't even have time to take a break.
From the beginning of researching holographic projection technology, to supervising the construction of the laboratory, and finally starting to study holographic shooting technology by accident, there was no rest time at all.
After working continuously like this, if it weren't for Jiang Cheng's strong physical fitness, he wouldn't be able to persist at all.
Now that all the things at hand have been completed, Jiang Cheng can finally take a rest.
After completing the holographic scanning camera, Jiang Cheng was not busy releasing the technology to let everyone know that he had succeeded.
He was going to hide it for a while, so that those who were waiting could continue for a while.
Jiang Cheng did this not to make those people anxious, but to have his own ideas.
He wants to make this technology an instant hit, appear in the public's sight in a shining way, and let everyone deeply remember this technology.
This is mainly to pave the way for future things, he developed this technology not just to satisfy everyone's wishes.
Since he has spent such a long time, it is only natural to get enough profit from it.
If he still can't make money after spending so much effort, Jiang Cheng would not do such a loss-making thing.
Jiang Cheng wanted to use holographic photography and holographic projection technology to earn a lot of money.
At present, his target is the film market, and there is no place more suitable for holographic technology than this.
Jiang Cheng believes that as long as holographic technology enters the film market, traditional films can be thrown into the trash.
Since you want to make money through this technology, you must demonstrate the potential of holographic technology.
(End of this chapter)
