Chapter 782 Core
·
Niao Shi Lang
Chapter 782 Core
If all the data of this experiment is good, it can be put into use and installed on the spacecraft for use.
Jiang Cheng looked anxiously at Lucy who was calculating and analyzing the status, waiting for Lucy to tell him the final result.
The waiting time always passes so slowly, not to mention that this matter is so important to Jiang Cheng.
Fortunately, Lucy's ability in calculation and analysis is very strong, and the results were obtained quickly, and Jiang Cheng did not suffer for a long time.
Under Jiang Cheng's expectant eyes, Lucy began to report the final result.
All test data calculation and analysis are completed, and now the final results will be reported.
Experiment No. 126 was triggered, and after seven days of full-load operation, there were no problems. "
And all the feedback data are normal, and all test indicators have met the design requirements.
Therefore, Lucy's analysis of this experimental engine is that it can be used normally on the very top of the universe, and it is a perfect curvature. After hearing Lucy's words, Jiang Cheng has been in suspense, and finally he can let go up.
Now Jiang Cheng has finally thrown away all the previous burdens, and is happy to face the final result.
The seven-day test was a kind of torture for Jiang Cheng, and the feeling of worry was really uncomfortable.
Jiang Cheng was really scared just now, and Lucy told him a bad result.
But in the end, Lucy's analysis results did not disappoint him. He finally successfully developed a curvature guide, and it can be put into practical use immediately.
This is the best result for Jiang Cheng, and the follow-up space program can finally continue.
As long as the curvature inducer is successfully developed, the technology required for the spaceship is almost complete.
For Jiang Cheng, it is only a matter of time for the remaining technologies that have not been conquered.
As long as all the remaining technologies are developed, Jiang Cheng can start making spaceships.
The spaceship is something in Jiang Cheng's dream, and now it's finally time for the dream to come true.
Great, finally conquered this most difficult bone!
From the tone of Jiang Cheng's speech and his expression now, we can know that he is very happy now.
He even seemed a little excited when he spoke, and he was no longer as calm as usual.
It is quite normal for Jiang Cheng to behave like this now. After seven months of hard work in the laboratory, he finally succeeded, of course he deserves to be happy.
Besides, curvature induction can be said to be the most difficult technology on the spacecraft, and now this technical difficulty has been overcome by Jiang Cheng, which is also worthy of Jiang Cheng's celebration.
However, Jiang Cheng only celebrated for a while, then returned to that state of absolute calm, and began to arrange follow-up work with Lucy.
"Lucy, record all the test data, keep all the experimental records in the past few months, and send the design drawings of this curvature engine to the R&D team when it may be used in the future, and let them arrange manpower to carry out Manufacturing work.
Now that the curvature trigger has been designed, the formal manufacturing work must begin.
Jiang Cheng plans to use this curvature guide as a standard configuration on future spaceships.
Before he develops a more advanced curvature guide, this joint guide is a must-have thing on all spaceships, so now the work of manufacturing is about to start.
After seven months of hard work, Jiang Cheng finally completed the research and development of the curvature guide.
Next is the final drama stage, and Jiang Cheng will start working hard for the spaceship.
After seven months of research, Jiang Cheng finally completed the research on the curvature engine.
During these seven months, Jiang Cheng basically never left his personal laboratory, and basically lived and boarded in the laboratory.
Although Jiang Cheng's personal laboratory is actually his home, this kind of research without going out for seven months is still too desperate for Jiang Cheng—now that the curvature engine has been researched and has begun to enter the manufacturing process, but Jiang Cheng couldn't relax yet.
There are several technologies required for the spacecraft that have not been researched, and Jiang Cheng plans to get all the technologies out in one go this time.
The remaining core technologies are much lower in difficulty than the curvature engine, and Jiang Cheng is also confident to develop them all in one go.
These core technologies are said to be less difficult than the curvature engine, but that is relatively speaking.
If these technologies were handed over to Jiang Cheng's R&D team, they would not be able to figure them out in a few years.
So now is not the time for Jiang Cheng to relax, and he will stay in the laboratory for a few months.
Anyway, Jiang Cheng has already stayed in the laboratory for seven months, and he doesn't care about staying for a longer period of time.
The main reason is that Jiang Chengcheng really can't wait too long, and can't wait to see the spaceship appear.
The attraction of spaceships to Jiang Cheng is too great, to the point where Jiang Cheng would risk his life for it.
As soon as Jiang Cheng thought of the appearance of the spaceship, his body was full of exhaustion, and he completely forgot the fatigue brought to him by the previous seven months of research.
So Jiang Cheng continued to invest in research and began to develop the remaining core technologies.
Time has passed so slowly, and it has been another five months since the curvature engine was successfully developed.
This time, it has been a whole year since Jiang Cheng was busy with the technology of the spacecraft.
Scientific research is such a waste of time, and this is because Jiang Cheng's research technology is already very fast.
If it were replaced by a general R&D team to accept these projects, it would not be possible to achieve Jiang Cheng's level within a few decades.
Although Jiang Cheng has been busy for a whole year, the time is not wasted.
With Jiang Cheng's unremitting efforts, the remaining technologies have been overcome one after another, and only the last core technology is still under research.
In other words, it took Jiang Cheng a year to complete the last piece of the universe puzzle.
Now, as long as Jiang Cheng completes the ongoing project, all the technologies needed for the spacecraft will be completed.
This means that Jiang Cheng can start building spaceships immediately, and humans will soon have their own spaceships.
The last core technology related to the spaceship has now entered the final stage of experimentation.
Jiang Cheng was standing in front of the test bench, looking at a piece of equipment placed on it.
The structure of the equipment on the test bench is very complex, consisting of countless different parts.
This complex piece of equipment is the last piece of core technology that is necessary for the spacecraft
Lucy, let's start the final test, I can't wait.
(End of this chapter)
If all the data of this experiment is good, it can be put into use and installed on the spacecraft for use.
Jiang Cheng looked anxiously at Lucy who was calculating and analyzing the status, waiting for Lucy to tell him the final result.
The waiting time always passes so slowly, not to mention that this matter is so important to Jiang Cheng.
Fortunately, Lucy's ability in calculation and analysis is very strong, and the results were obtained quickly, and Jiang Cheng did not suffer for a long time.
Under Jiang Cheng's expectant eyes, Lucy began to report the final result.
All test data calculation and analysis are completed, and now the final results will be reported.
Experiment No. 126 was triggered, and after seven days of full-load operation, there were no problems. "
And all the feedback data are normal, and all test indicators have met the design requirements.
Therefore, Lucy's analysis of this experimental engine is that it can be used normally on the very top of the universe, and it is a perfect curvature. After hearing Lucy's words, Jiang Cheng has been in suspense, and finally he can let go up.
Now Jiang Cheng has finally thrown away all the previous burdens, and is happy to face the final result.
The seven-day test was a kind of torture for Jiang Cheng, and the feeling of worry was really uncomfortable.
Jiang Cheng was really scared just now, and Lucy told him a bad result.
But in the end, Lucy's analysis results did not disappoint him. He finally successfully developed a curvature guide, and it can be put into practical use immediately.
This is the best result for Jiang Cheng, and the follow-up space program can finally continue.
As long as the curvature inducer is successfully developed, the technology required for the spaceship is almost complete.
For Jiang Cheng, it is only a matter of time for the remaining technologies that have not been conquered.
As long as all the remaining technologies are developed, Jiang Cheng can start making spaceships.
The spaceship is something in Jiang Cheng's dream, and now it's finally time for the dream to come true.
Great, finally conquered this most difficult bone!
From the tone of Jiang Cheng's speech and his expression now, we can know that he is very happy now.
He even seemed a little excited when he spoke, and he was no longer as calm as usual.
It is quite normal for Jiang Cheng to behave like this now. After seven months of hard work in the laboratory, he finally succeeded, of course he deserves to be happy.
Besides, curvature induction can be said to be the most difficult technology on the spacecraft, and now this technical difficulty has been overcome by Jiang Cheng, which is also worthy of Jiang Cheng's celebration.
However, Jiang Cheng only celebrated for a while, then returned to that state of absolute calm, and began to arrange follow-up work with Lucy.
"Lucy, record all the test data, keep all the experimental records in the past few months, and send the design drawings of this curvature engine to the R&D team when it may be used in the future, and let them arrange manpower to carry out Manufacturing work.
Now that the curvature trigger has been designed, the formal manufacturing work must begin.
Jiang Cheng plans to use this curvature guide as a standard configuration on future spaceships.
Before he develops a more advanced curvature guide, this joint guide is a must-have thing on all spaceships, so now the work of manufacturing is about to start.
After seven months of hard work, Jiang Cheng finally completed the research and development of the curvature guide.
Next is the final drama stage, and Jiang Cheng will start working hard for the spaceship.
After seven months of research, Jiang Cheng finally completed the research on the curvature engine.
During these seven months, Jiang Cheng basically never left his personal laboratory, and basically lived and boarded in the laboratory.
Although Jiang Cheng's personal laboratory is actually his home, this kind of research without going out for seven months is still too desperate for Jiang Cheng—now that the curvature engine has been researched and has begun to enter the manufacturing process, but Jiang Cheng couldn't relax yet.
There are several technologies required for the spacecraft that have not been researched, and Jiang Cheng plans to get all the technologies out in one go this time.
The remaining core technologies are much lower in difficulty than the curvature engine, and Jiang Cheng is also confident to develop them all in one go.
These core technologies are said to be less difficult than the curvature engine, but that is relatively speaking.
If these technologies were handed over to Jiang Cheng's R&D team, they would not be able to figure them out in a few years.
So now is not the time for Jiang Cheng to relax, and he will stay in the laboratory for a few months.
Anyway, Jiang Cheng has already stayed in the laboratory for seven months, and he doesn't care about staying for a longer period of time.
The main reason is that Jiang Chengcheng really can't wait too long, and can't wait to see the spaceship appear.
The attraction of spaceships to Jiang Cheng is too great, to the point where Jiang Cheng would risk his life for it.
As soon as Jiang Cheng thought of the appearance of the spaceship, his body was full of exhaustion, and he completely forgot the fatigue brought to him by the previous seven months of research.
So Jiang Cheng continued to invest in research and began to develop the remaining core technologies.
Time has passed so slowly, and it has been another five months since the curvature engine was successfully developed.
This time, it has been a whole year since Jiang Cheng was busy with the technology of the spacecraft.
Scientific research is such a waste of time, and this is because Jiang Cheng's research technology is already very fast.
If it were replaced by a general R&D team to accept these projects, it would not be possible to achieve Jiang Cheng's level within a few decades.
Although Jiang Cheng has been busy for a whole year, the time is not wasted.
With Jiang Cheng's unremitting efforts, the remaining technologies have been overcome one after another, and only the last core technology is still under research.
In other words, it took Jiang Cheng a year to complete the last piece of the universe puzzle.
Now, as long as Jiang Cheng completes the ongoing project, all the technologies needed for the spacecraft will be completed.
This means that Jiang Cheng can start building spaceships immediately, and humans will soon have their own spaceships.
The last core technology related to the spaceship has now entered the final stage of experimentation.
Jiang Cheng was standing in front of the test bench, looking at a piece of equipment placed on it.
The structure of the equipment on the test bench is very complex, consisting of countless different parts.
This complex piece of equipment is the last piece of core technology that is necessary for the spacecraft
Lucy, let's start the final test, I can't wait.
(End of this chapter)
