830 Assembly
·
Niao Shi Lang
830 Assembly
As soon as the last batch of palace roof modules were transported to the construction site, Jiang Cheng called all the management personnel and held an engineering meeting in the engineering headquarters.
"Now that the prefabricated modules of the roof have arrived, we will start writing about the construction of the roof.
Go down and inform the astronauts of each unit, and then concentrate on completing the top project
Let us quickly complete this part of the most difficult work, so that everyone can relax a bit
Jiang Cheng stood in the middle of the engineering headquarters and issued follow-up orders to all the surrounding managers.
The next work is the focus of the whole project. I hope everyone cheers up. As long as we can finish the construction of the roof with care, the whole project will be half completed.
The most difficult part of the whole project is about to start, and now even Jiang Cheng is a little nervous.
That's why he repeatedly emphasized this matter in the engineering headquarters, hoping to attract everyone's attention.
Judging from the construction time of the entire city, the construction of the roof will take up half of the time.
From this point, we can see the importance of this project, and it is no wonder that Jiang Cheng is so nervous.
After the construction meeting, everyone dispersed and started different tasks.
In the top brain work, everyone has his or her own responsibility, and this super project can only be completed if everyone works together.
In Zhou Tian at the construction site, there is a group of four-shaped structures.
This huge circle is the foundation of the roof, supporting the weight of the entire palace roof.
Now that the foundation of the entire dome has been built, the construction of the ground part will start next.
I saw a huge hoisting robot, hoisting huge oblivion modules from the stacked place to the predetermined place.
There is a number on each prefabricated block of the palace roof, and the long series of numbers represent where it should be placed.
This hoisting work is not so simple, it needs good overall planning because the whole dome is composed of countless prefabricated blocks, because there are too many prefabricated blocks, so I want to put every prefabricated block where it should be place, this is a huge problem.
With so many prefabricated blocks piled up on site, if you don’t pay attention, you will place them incorrectly and the subsequent assembly work will be put on hold.
Jiang Cheng commanded his management personnel, and it took several days to put all the modules at the predetermined location.
It takes so much time to prepare for the early stage, and the difficulty of building the roof of the palace is reflected here.
Putting the prefabricated blocks in place is only the beginning, afterward the assembly work is the real difficulty.
Although this prefabricated construction technology is much simpler in construction than integral molding construction.
But this simplicity is only relatively speaking. Don't look at it as just assembling work, there are many issues that need to be considered.
This roof is not the one on the water polo, it is the roof that will be used as a protective layer on Mars.
Therefore, this transparent dome must be absolutely airtight.
If there is a dimensional gap between the prefabricated blocks, even a small gap will cause a huge disaster.
When Jiang Cheng built the entire palace roof, he had to ensure that each prefabricated block fit perfectly, and then welded them together with special techniques to form a solid whole.
Each prefabricated block can be produced after calculation in advance, and it will not work if there is a wrong installation.
Therefore, when installing and constructing, it is necessary to ensure that each prefabricated block has no installation errors, and all of them are installed in the planned place.
There are so many things that need to be paid attention to in the whole project, even Jiang Cheng, the general manager, had to be on site during the construction.
After more than two months of construction, the construction of the writing roof is still going on. Jiang Cheng stood at the construction site and watched the astronauts install the prefabricated blocks.
Each prefabricated block was not lifted into the air, and began to be spliced together with other prefabricated blocks
Under the reflection of the sunlight, the prefabricated blocks of the oblivion shone with dazzling light.
If it weren't for the helmets on the spacesuits with their own strong light filtering function, the eyes of the people on the scene might not be able to open.
Numerous transparent modules are moving in the air and hoisted to the predetermined assembly position.
The most difficult thing is that when several prefabricated blocks are close to each other, it is necessary to repeatedly adjust their positions before they can be spliced together.
After the installation of several nearby prefabricated blocks is completed, strict inspection and testing must be carried out to ensure that there is no gap between each "zero twenty" prefabricated blocks before the next process can be carried out.
After the splicing is completed, the astronauts will use special equipment to connect the transparent prefabricated blocks together.
This kind of welding equipment is specially made by Jiang Cheng, which can make the welding traces invisible while ensuring the welding is firm.
Such a special welding method ensures the transparency of the entire palace roof, and there will be no problems due to welding.
After the entire roof is assembled, it looks like a whole, without even the slightest gap.
At that time, standing inside the city and looking up at the sky, it will be like being outside Mars, completely unaware of the existence of the transparent dome.
Perhaps only after repeatedly adjusting the angle can one barely see the wheel at the top of the palace.
This kind of design is the effect that Jiang Cheng most wants to achieve, so that people in the city will not feel any constraints, just like staying on the surface of Mars.
While Jiang Cheng was inspecting the construction site, Xiao Peng walked up to Jiang Cheng and said, "The hoisting of the prefabricated blocks in the A37 area is about to be completed, do you want to go and have a look.
The construction of the entire roof is divided into countless districts, and each area has a special person responsible for the installation.
Many areas are under construction at the same time, so as to ensure the efficiency of the project. If the roof is installed slowly bit by bit, Jiang Cheng and the others may not be able to complete the installation in a few years.
So in the end they adopted a segmented installation model. Each area first installed a part of the palace roof, and finally connected the different areas.
But in this way, the coordination between each other is very important. If the two areas cannot be connected in the end, the two areas must be dismantled and reassembled.
In order to prevent this kind of thing from happening, Jiang Cheng and the others had to inspect the site at any time and coordinate the progress between different areas, so that the roof of the palace could be completely assembled together in the end.
Since the entire Martian city covers a large area, Jiang Cheng does not know the situation in other areas.
After hearing the news reported by Xiao Peng, Jiang Cheng decided to go and have a look.
The progress over there is pretty good, let's go over and have a look together.
After speaking, Jiang Cheng took the lead on the Mars rover next to him, ready to go there with Xiao Peng to have a look.
(End of this chapter)
As soon as the last batch of palace roof modules were transported to the construction site, Jiang Cheng called all the management personnel and held an engineering meeting in the engineering headquarters.
"Now that the prefabricated modules of the roof have arrived, we will start writing about the construction of the roof.
Go down and inform the astronauts of each unit, and then concentrate on completing the top project
Let us quickly complete this part of the most difficult work, so that everyone can relax a bit
Jiang Cheng stood in the middle of the engineering headquarters and issued follow-up orders to all the surrounding managers.
The next work is the focus of the whole project. I hope everyone cheers up. As long as we can finish the construction of the roof with care, the whole project will be half completed.
The most difficult part of the whole project is about to start, and now even Jiang Cheng is a little nervous.
That's why he repeatedly emphasized this matter in the engineering headquarters, hoping to attract everyone's attention.
Judging from the construction time of the entire city, the construction of the roof will take up half of the time.
From this point, we can see the importance of this project, and it is no wonder that Jiang Cheng is so nervous.
After the construction meeting, everyone dispersed and started different tasks.
In the top brain work, everyone has his or her own responsibility, and this super project can only be completed if everyone works together.
In Zhou Tian at the construction site, there is a group of four-shaped structures.
This huge circle is the foundation of the roof, supporting the weight of the entire palace roof.
Now that the foundation of the entire dome has been built, the construction of the ground part will start next.
I saw a huge hoisting robot, hoisting huge oblivion modules from the stacked place to the predetermined place.
There is a number on each prefabricated block of the palace roof, and the long series of numbers represent where it should be placed.
This hoisting work is not so simple, it needs good overall planning because the whole dome is composed of countless prefabricated blocks, because there are too many prefabricated blocks, so I want to put every prefabricated block where it should be place, this is a huge problem.
With so many prefabricated blocks piled up on site, if you don’t pay attention, you will place them incorrectly and the subsequent assembly work will be put on hold.
Jiang Cheng commanded his management personnel, and it took several days to put all the modules at the predetermined location.
It takes so much time to prepare for the early stage, and the difficulty of building the roof of the palace is reflected here.
Putting the prefabricated blocks in place is only the beginning, afterward the assembly work is the real difficulty.
Although this prefabricated construction technology is much simpler in construction than integral molding construction.
But this simplicity is only relatively speaking. Don't look at it as just assembling work, there are many issues that need to be considered.
This roof is not the one on the water polo, it is the roof that will be used as a protective layer on Mars.
Therefore, this transparent dome must be absolutely airtight.
If there is a dimensional gap between the prefabricated blocks, even a small gap will cause a huge disaster.
When Jiang Cheng built the entire palace roof, he had to ensure that each prefabricated block fit perfectly, and then welded them together with special techniques to form a solid whole.
Each prefabricated block can be produced after calculation in advance, and it will not work if there is a wrong installation.
Therefore, when installing and constructing, it is necessary to ensure that each prefabricated block has no installation errors, and all of them are installed in the planned place.
There are so many things that need to be paid attention to in the whole project, even Jiang Cheng, the general manager, had to be on site during the construction.
After more than two months of construction, the construction of the writing roof is still going on. Jiang Cheng stood at the construction site and watched the astronauts install the prefabricated blocks.
Each prefabricated block was not lifted into the air, and began to be spliced together with other prefabricated blocks
Under the reflection of the sunlight, the prefabricated blocks of the oblivion shone with dazzling light.
If it weren't for the helmets on the spacesuits with their own strong light filtering function, the eyes of the people on the scene might not be able to open.
Numerous transparent modules are moving in the air and hoisted to the predetermined assembly position.
The most difficult thing is that when several prefabricated blocks are close to each other, it is necessary to repeatedly adjust their positions before they can be spliced together.
After the installation of several nearby prefabricated blocks is completed, strict inspection and testing must be carried out to ensure that there is no gap between each "zero twenty" prefabricated blocks before the next process can be carried out.
After the splicing is completed, the astronauts will use special equipment to connect the transparent prefabricated blocks together.
This kind of welding equipment is specially made by Jiang Cheng, which can make the welding traces invisible while ensuring the welding is firm.
Such a special welding method ensures the transparency of the entire palace roof, and there will be no problems due to welding.
After the entire roof is assembled, it looks like a whole, without even the slightest gap.
At that time, standing inside the city and looking up at the sky, it will be like being outside Mars, completely unaware of the existence of the transparent dome.
Perhaps only after repeatedly adjusting the angle can one barely see the wheel at the top of the palace.
This kind of design is the effect that Jiang Cheng most wants to achieve, so that people in the city will not feel any constraints, just like staying on the surface of Mars.
While Jiang Cheng was inspecting the construction site, Xiao Peng walked up to Jiang Cheng and said, "The hoisting of the prefabricated blocks in the A37 area is about to be completed, do you want to go and have a look.
The construction of the entire roof is divided into countless districts, and each area has a special person responsible for the installation.
Many areas are under construction at the same time, so as to ensure the efficiency of the project. If the roof is installed slowly bit by bit, Jiang Cheng and the others may not be able to complete the installation in a few years.
So in the end they adopted a segmented installation model. Each area first installed a part of the palace roof, and finally connected the different areas.
But in this way, the coordination between each other is very important. If the two areas cannot be connected in the end, the two areas must be dismantled and reassembled.
In order to prevent this kind of thing from happening, Jiang Cheng and the others had to inspect the site at any time and coordinate the progress between different areas, so that the roof of the palace could be completely assembled together in the end.
Since the entire Martian city covers a large area, Jiang Cheng does not know the situation in other areas.
After hearing the news reported by Xiao Peng, Jiang Cheng decided to go and have a look.
The progress over there is pretty good, let's go over and have a look together.
After speaking, Jiang Cheng took the lead on the Mars rover next to him, ready to go there with Xiao Peng to have a look.
(End of this chapter)
