Chapter 659: Automatic craniotomy machine is ready! Craniotomy enters the two-minute era!

Academician Boring accepted very few students in his lifetime, only thirteen in total, but each one was a genius and had a profound impact on emergency medicine.

However, most of these people slowly become no longer pure because they are too close to the human world.

Doctors are just such a profession.

If you get too close to the patient and see too much, you will become a philistine. If you consider too many things, you will no longer be a pure healer.

But if you are too far away, you will look like a cold-blooded bystander, lacking in human touch.

Only with an innocent heart that always empathizes with others but always maintains a certain distance can we implement the four words "the benevolent heart of a doctor".

What is commendable is that Xu Qiu is such a pure person.

In fact, I live a cleaner and more thorough life than I did before!

"I never thought that I would be able to do two major things in my later years. One is to punish dishonest CNKI students, and the other is to accept a student. I will live for more than ten years in vain!" Academician Boring laughed boldly, and his mood was extremely good.

…

A few days later.

Automatic craniotomy laboratory.

A figure rushed out excitedly. Barton had a messy beard and hair, and his eyes were bloodshot, but his tired look could not hide his excited expression.

"It's done, it's done! The experiment of the new craniotomy machine was successful!"

One week and three days after the basic depth-of-cut control device was completed, a new version of the craniotomy machine was finally released!

"Quickly, inform Xu Qiu that we must wait for him to witness its startup!" Barton danced.

After a while, Xu Qiu came over after hearing the news.

The center of the laboratory has been cleared, except for a large automatic craniotomy machine.

Compared with the previous generation, Xu Qiu's improved craniotomy machine actually doesn't have much difference in appearance.

The changes made are all internal, such as MCU microprocessing circuit, rocker arm device, depth of cut device, inverter non-synchronous motor, etc...

Barton wore gloves, carefully touched the new craniotomy machine, and introduced it in detail:

“We have improved every aspect of the craniotomy machine.

"First of all, the host adopts the MCU microprocessor circuit designed by Dr. Xu, and also includes a constant speed drive system. The load drop has been less than five percent.

“In addition, it is equipped with automatic motor identification function.

“The most innovative thing is that we have designed a system based on the improved hardware that allows users to customize the peak speed as a percentage of the maximum speed according to their own surgical habits, and control it through the foot switch. Continuously variable speed!”

Xu Qiu was a little surprised.

This is not included in my design drawings.

Previous craniotomy machines could not do this, so it was up to doctors to adapt to automatic craniotomy machines.

After all, this thing costs tens of millions, which is much more precious than ordinary doctors.

This also brings a lot of difficulty for beginners to get started. It has been more than three months since the introduction of craniotomy machines in clinical hospitals, but only two people can master the previous generation of craniotomy machines.

One of them is Director Zhu...

However, the new type of craniotomy machine achieves stepless speed change, which in turn allows the machine to adapt to the operator, which will greatly reduce the difficulty of control and also make the operator more comfortable!

Barton held his head high, and the other design team members were also quite proud...Xu Qiu was recognized by them as a genius, and being able to exceed Xu Qiu's expectations gave them a sense of accomplishment.

Barton pinched his beard and said: "We have also made our own improvements to the micromotor. Its core components come from the cutting-edge technology of Berry Country. It is equipped with a Stealthstation navigation system, a six-dimensional force perception system, etc. The output power is extremely strong, and It can control accurately, the peak output power is greater than 150W, and the rotation speed is greater than 50,000 rpm!

"There are also skull drills and skull milling cutters with a maximum speed of more than 100,000 rpm and a locking function..."

…

After the introduction, a simulated skull was placed on the operating table.

Just as Xu Qiu was about to step forward, Barton quickly stopped him: "Doctor Xu, I'm coming, I'm coming!"

"Are you coming?" Xu Qiu was confused.

"Yes, I'm not a surgeon. If I could control the depth of the craniotomy, I couldn't be more convincing!"

"Yes." Xu Qiu nodded seriously.

If you let him use it, even the previous generation craniotomy machine can easily handle it.

But Button was different.

Although this old man also has a medical background, it is only to assist in the research of automatic craniotomy machines and to lay the foundation. The depth is not enough, and he has never been on a serious operating table.

He can control the depth of the craniotomy, and if he can make good use of this craniotomy machine, it will not be difficult for the clinician.

"Ready!" Barton roughly put on surgical clothes. His image looked more like a butcher than a doctor.

"Activated."

Barton concentrated on controlling the automatic craniotomy machine.

Sizzling——

There was a sharp cutting sound.

In just two minutes, a perfect bone window incision was made.

The neat, precise, and sharp drill bit stopped just on the fragile blood vessel, and it only missed the point of penetration by a millimeter.

"Incredible!" Barton left the automatic craniotomy machine excitedly. He was holding the skull and couldn't be more excited.

Success, the new generation of craniotomy machine has finally overcome this problem!

Ever since the birth of the automatic craniotomy machine, the problem of being unable to control the cutting depth has never been solved.

As a result, the speed of the craniotomy machine can never be increased, and risks always exist.

But with Xu Qiu's design, this problem is finally a thing of the past!

It usually takes about 20 minutes for a senior neurosurgeon to open a skull window, and it may even take several hours for a more complicated one!

However, with the automatic craniotomy machine, craniotomy will become as easy as cutting melons and vegetables. It takes two minutes to open a head. As long as the CT and other navigation technologies are scanned, the path and program are set, there will be no mistakes!

Although opening the skull is just the beginning on a real operating table, there are more complicated treatment processes afterwards, such as tumor removal in tumor surgery and hematoma elimination in brain hemorrhage surgery... But being able to open a head in two or three minutes will give the surgeon a lot of margin of error, and the risk of surgery will be reduced to the extreme.

"Doctor Xu, give it a name!" Barton and others came to Xu Qiu holding a simulated skull.

Everyone's expression was solemn and expectant... They had already recognized Xu Qiu. Without Xu Qiu, they might have to spend decades to get to where they are today!

Barton may be the backbone of this team.

However, the absolute core of this generation of new craniotomy machines can only be Xu Qiu!

All improvements and creations are based on the original design drawings given by Xu Qiu, including the innovations made by the Patton team, which are also because Xu Qiu's design drawings provide the hardware foundation!

If the design of stepless transmission is replaced with the previous generation of craniotomy machine, it will also fail because the hardware design cannot keep up... All success is based on Xu Qiu's drawings!

"Name?"

Xu Qiu thought about it and decided not to use the Linhai craniotomy machine as the name this time. After all, this is also the joint achievement of the University of Utah, the Patton team, etc.