Chapter 352 The Tricks at Jiangcheng Heavy Machinery Factory (4K) (Page 12)

That night, Chang Haonan and his party stayed in a guest house arranged by the Office of Science and Industry.

There is no need to open an extra room.

Because Hong Kun and Zhu Yadan both said that they could live in one room because they would take turns to rest at night during the mission.

Chang Haonan's room is at the end, so anyone who wants to go there must pass through the doorways of the other two rooms.

He felt that this seemed a bit too sensitive, and if he didn't get enough rest, it might affect his tasks during the day tomorrow.

However, Hong Kun said that they have been accustomed to this way of rest after training, and the security work is not the most careful but more careful.

Considering that the person in charge of safety work arranged by Ding Gaoheng was Hong Kun, Chang Haonan was not prepared to say anything more on this matter.

Everyone is also doing it for his own good.

Fortunately, one night passed and nothing happened.

The next day, Chang Haonan officially went to Jiangcheng Heavy Machine Tool Factory with a group of eight people according to the original plan.

The person who led the team to welcome him was naturally Jiang Zhong's deputy director, named Lin Xu.

This year, the management model of state-owned enterprises has been changed to the factory director responsibility system. However, Jiang Zhong's factory director resigned two years ago due to performance issues, and the candidate for the new factory director has not been formally documented, so he is considered Jiang Zhong's. The number one.

"Director Lin, hello."

"Hello, Mr. Chang, we only received a notice at noon yesterday that a technical expert from the capital was going to visit our factory for inspection. The time was short and we really didn't provide good hospitality."

Lin Xu came up and shook hands, then expressed with an embarrassed look,

"So the banners and slogans are, firstly, too late to prepare, and secondly, you may not know that our factory's current income and expenditure situation is not optimistic, and it is true that we cannot have much spare funds."

These words almost burned the CPU of Qin Xueming, who was following behind and was just a driver.

He has been working in the system for 20 years and has never seen this kind of gameplay.

In the past, when there were enterprises under the Science and Industry Office, he also went to inspect them.

Those factory directors and secretaries, no matter how bad the company's situation is, are eager to spend their money to carry out face-saving projects.

As a result, when Lin Xu, the factory director, faced the investigators appointed by his superiors, his first sentence was "Our factory's current revenue and expenditure situation is not optimistic"?

Is there really such an honest person?

Do you still want to get involved in the system?

However, Chang Haonan's reaction was very ordinary:

"It doesn't matter, I didn't give any instructions originally, but there is a project at the Aviation Industry Port, which requires a super-heavy CNC vertical milling lathe of more than 15 meters. I heard that your factory is currently the only one in China. model, so I came over to take a look.”

In fact, on the plane to Jiangcheng yesterday, he also thought about whether he would encounter the local factory director who looked down on the technicians sent by his superiors and tried to fool him by substituting them, but he was exposed on the spot and pretended to be fake. In the end, under his guidance, he led the entire factory to turn losses into profits and take off.

But after thinking about it again and again, I felt it was unlikely.

When he received the May th Medal before he came here, some of his deeds were made public.

Although it is not as scary as the actual situation, it at least shows that he must have a science and engineering background.

Secondly, after all, he is known as the chief engineer of a certain project. No matter how young he is, he can still intimidate people.

Of course, if such a factory suffers long-term losses, the other party must try to trick it somewhere.

But it won't be that blunt approach.

After meeting Lin Xu today, I found that my guess was indeed good.

The honesty shown by the other person was astounding.

"Anyway, since Mr. Chang is here, I will always take you to visit our Jiangzhong. Although there are some difficulties at the moment, we are also trying every way to overcome them."

Lin Xu said as he took Chang Haonan and his party to the door of the building closest to the factory entrance:

“Let’s start from the factory history museum of our factory.”

……

Chang Haonan did not interrupt the route planned by Lin Xu. He wanted to see what the other party was planning to do.

But the latter had no intention of delaying time. After fluently introducing Jiang Zhong's history, he directly brought Chang Haonan and the others into the production area.

Although Jiang Zhong's name is "Jiangcheng Heavy Machine Tool Factory", in fact, his business scope has not been limited to manufacturing machine tools, so the related equipment is extremely complicated. If he hadn't stayed in Factory 112 and Factory 410 for a long time, even I also studied with Zhong Shihong, the technical director of Factory 410, for a period of time. I'm afraid if I really walked in, I would be dazzled.

"I think Chang always has a background in research. Have you ever been to a factory in a traditional industry like ours before?"

While in the changing area, Lin Xu asked seemingly unintentionally.

“I’ve never been to one of this scale.”

Chang Haonan gave an unclear answer.

"This is the final assembly shop for machine tools."

After putting on work clothes and safety helmets, everyone came to the first workshop.

What surprised Chang Haonan was that there was no chaotic or even dilapidated scene like he had imagined.

Although from the perspective of a reborn person, the layout of this workshop still has problems such as unclear classification of raw material areas and semi-finished products areas, serious crossover of logistics lines, too long material handling distances and duplicate routes, but it is a building built in the mid-90s. For the factory, this is not something worth criticizing.

The only problem is that the number of workers working here is a bit small, making the entire workshop deserted.

"The super heavy-duty CNC vertical milling lathe you want to buy, the corresponding model in our factory is CKX53160-1, 16 meters. In the past, we have manufactured two units for the electric power departments of Guangxi Province and Hunan Province. We have one on hand that was abandoned by a customer after default. If you place an order for semi-finished products now, they can be delivered in the first half of next year at the earliest.”

"Director Lin, the performance of your flagship product should be quite good. With such a high technical level, why can't the factory benefit from what I heard you just say?"

"Hey... What's the point of having a high technical level? I always have my say and I don't hide the situation from the organization."

Speaking of this, Lin Xu sighed helplessly:

“Such flagship products like these are all produced by us, by gathering together some experienced master craftsmen, engaging in production contracting, assigning responsibilities to each person, and using a manual workshop model. Otherwise, they would all be semi-finished products. Will it take more than half a year to complete?"

"But this whole method is to put it bluntly, it is a production war. It is okay if the output is small, but there is no way to use it on mass-produced things. In addition, now that the old masters have retreated, there are still people who usually go out to take on private work. , the new young people are impatient and unwilling to learn skills, and even this kind of precision workshop is becoming less and less efficient.”

"Mr. Chang, you also have a background in science and engineering. You know that modern industry pays attention to standardized production. If we work intensively like ours, the cost of each piece of equipment is much higher than imported ones, and the quality is almost the same as others. What you bought is It is difficult to import this kind of machine tools, so there are still sales. Others that can be bought from abroad have no one come to us at all. Now this workshop is the most used place in our factory."