Chapter 143 Solved the case

Leaders are walking in front. Passers-by like Li Weidong, who are watching the fun, can only follow the crowd and poke their hands and feet, like a poor little one.

From the weaving workshop, to the washing workshop, to the printing workshop, Li Weidong has been quietly following behind, carefully observing every production detail of the Harvest Factory, hoping to find loopholes.

Finally, after coming to the printing workshop, Li Weidong waited for the opportunity.

The first blanket that came out of the printing machine was the first blanket that Zhang Zhenbei and others saw, and the pattern was still very clear.

However, after the next few blankets, the pattern changed. First, the clarity decreased, and then the outline of the pattern became blurred. Later, there was a phenomenon of overlapping patterns. For example, the two petals of the rich peony overlapped. printed together.

This is exactly what Li Weidong expects.

Raschel blankets are different from traditional blankets. Raschel blankets are woven using a special Raschel warp knitting machine. Since the product is warp knitting, all wool yarns are woven into circles, and there is no mutual knitting. The suede of the blanket is fluffy, but the inside is very tight.

It is precisely because of the fluffy outside and firmness of the Raschel blanket that the Raschel blanket has higher requirements for the platen glue when printing. If the platen glue does not meet the standard, but only sticks to the soft suede of the Raschel blanket, but does not stick to the main body of the blanket, there will inevitably be defects in the printing process.

The platen glue produced by Li Weidong is a process in the 1990s. At that time, most domestic blanket manufacturers produced Raschel blankets, so the platen glue production process mastered by Li Weidong was the most suitable for Raschel. Blanket.

However, the production process used in the second chemical factory in the 1980s, the platen glue produced is mainly used for ordinary blankets. It is used on Raschel blankets. It is OK to print one or two sets. If you continue to print, There are bound to be flaws.

These are all in Li Weidong's calculations. When he learned from Yao Guangzhi that the Fengshou Factory will produce Raschel blankets after the joint venture, he already knows that the Fengshou Factory is inseparable from the Shenfutun Chemical Factory. If the Fengshou Factory wants to produce Raschel If you want to make blankets, you must use the platen glue produced by Shenfutun Chemical Factory.

It is also for this reason that when Li Weidong learned that the Harvest Plant had also started to purchase from the Second Chemical Plant, he did not panic at all. Instead, he came to the opening ceremony of the Harvest Plant to watch a joke.

When Li Weidong found that the new blankets on the printing machine were becoming less and less clear, and even the patterns overlapped, Li Weidong whispered to Shen Zheng who was beside him: Second uncle, you step back first, there will be a good show soon. already.

Immediately afterwards, Li Weidong shouted: Oh, look, why is this print blurred!

This call instantly attracted the attention of the surrounding people. People followed the direction of Li Weidong's fingers and looked at the blanket that had just been printed, and they found a problem.

Why does the pattern of this wealthy peony look a little fuzzy!

There seems to be a problem with the colors too, the outlines between the two colors are serialized together.

Look at that one, the two petals overlap, such a print is definitely not qualified!

Yeah, according to the quality inspection standards for blankets, these blankets are all defective!

Among these people, there is no shortage of professionals, many of them are from the textile system, and they have some understanding of blankets.

In front, Zhang Zhenbei was about to walk to the door of the workshop, but when he heard someone shouting The printing is gone, he stopped instantly.

Zhang Zhenbei turned around and looked back, but because the distance was a bit far and there were a lot of people behind him, Zhang Zhenbei couldn't see what was happening behind him.

Zhang Zhenbei showed a puzzled expression, but that was enough. With this expression alone, someone immediately went to find out what happened.

After dozens of seconds, the secretary hurried over, came to Zhang Zhenbei, and said in a low voice, Leader, I heard that it seems to be a newly produced blanket.

A quality problem occurred.

Quality problem? Zhang Zhenbei raised his eyebrows and his eyes became sharp.

The secretary knew that Zhang Zhenbei's expression showed that he was very dissatisfied.

Just now, Zhang Zhenbei gave instructions to strictly control the quality, to ensure the quality of export products, and not to shame the country.

Zhao Chengming also swore that he would put quality first.

However, before the door of the production workshop came out, there was a quality problem, which was simply hitting Zhang Zhenbei in the face!

Next to him, Hong Kong businessman Chen Jiade suddenly seemed a little nervous. After all, he spent real money and invested in the Harvest Factory. If the quality of the Harvest Factory's products did not meet the standard, then he would not be able to export blankets to Japan. Not to be fooled!

When such an unexpected situation occurred, Zhang Zhenbei naturally couldn't pretend that he didn't see anything. He turned around abruptly, and then walked back. The people behind saw Zhang Zhenbei walking towards the back in a haughty manner, and they all gave up. the road.

Zhang Zhenbei came to the printing machine and frowned when he looked at the blankets just finished the printing process.

Although Zhang Zhenbei is a layman, it can be seen at a glance whether the printing pattern is clear, especially the rich peony, the two petals are printed together, as long as you are not blind, you can see it, the printing process is out Problem, this is a defective product.

There really is a quality problem! The gloom on Zhang Zhenbei's face was fleeting, and then he asked in a low voice, Director Zhao, what's going on?

How can this happen! Zhao Chengming was shocked, and he quickly explained: Well, there may be some faults in the equipment! Leader, don't worry, our engineers will be able to solve it immediately! It will definitely not affect subsequent production.

However, Chen Jiade walked over, picked up the defective blankets, and looked at them carefully.

The first two blankets are fine, and the patterns are relatively clear. From the third one, the patterns are blurred, and the back is more and more blurred. First, the colors overlap, and then the patterns overlap. This should not be equipment. The problem is caused. Chen Jiade said.

Mr. Chen, since it's not a problem with the equipment, what is the cause? Zhang Zhenbei asked.

It's a problem with the textile coating. Chen Jiade touched the surface of the blanket with his hand, and then said, No impurities were found on the surface, and there was no hair loss. It shouldn't be a problem with the detergent!

Then Chen Jiade took out a magnifying glass and carefully probed the areas of different colors, especially the areas where the two colors were adjacent.

After a while, Chen Jiade said: Although the pattern is getting blurry, the dyeing effect is still very good, so it is not a problem of the printing agent. If there is a problem with the printing agent, the dyeing effect should also become worse. right.

Chen Jiade continued to look at a few problematic blankets. He turned the blankets over and carefully inspected the fluff.

Finally, Chen Jiade put away the magnifying glass in his hand and said, It's the problem of the platen glue! The adhesive strength of the platen glue is not enough, and it only sticks to the fluff on the surface, so during the printing, the blanket appeared loose, This leads to problems with printing!

Chen Jiade has been in the textile business since his father's generation, so he is also an insider. After a careful inspection, he found the problem.

Zhang Zhenbei is a layman after all, so he simply asked: Mr. Chen, since we have found the reason, it shouldn't be too difficult to rectify it, right?

Chen Jiade shook his head: I am now wondering why this happens. Before this, I personally checked the chemical preparations used in the harvest factory, and there is no problem with the platen glue!

Previously, the Harvest Factory purchased from Li Weidong, and Chen Jiade personally inspected it. It is also the platen glue produced by the Shenfutun Chemical Factory. Of course, there is no problem.

But since Zhao Chengming took the rebate, he began to purchase from the second chemical factory, and of course there will be problems with the platen glue.

And Chen Jiade didn't know about this. Although he owns 40% of the shares, he has no decision-making power over the management of the Harvest Factory. The real person in charge of the Harvest Factory is the factory director, Zhao Chengming.

This is also a common phenomenon in early joint ventures. The 1979 version of the Joint Venture Law was implemented at that time, and there were still many restrictions on foreign investors in joint ventures.

For example, in terms of the board of directors, the 1979 version of the Joint Venture Law clearly stipulates that the chairman must be the Chinese side, and foreign businessmen can only serve as vice-chairmen, that is, the actual control and decision-making power of the enterprise is in the hands of the Chinese side.

Later, when the Joint Venture Law was amended, this article was changed, and the chairman was negotiated by all parties or elected by the board of directors, which means that foreign capital can obtain management and decision-making power of the enterprise.

Zhao Chengming had already received a three-point rebate on the matter of changing the supplier. Zhao Chengming had a guilty conscience, so of course, the less people knew about this matter, the better. Zhao Chengming did not take the initiative to inform Chen Jiade.

I saw Chen Jiade think for a moment and said, I want to see the platen glue we are using now.

Well... Zhao Cheng was obviously hesitant.

Zhang Zhenbei looked at Zhao Chengming with a serious face, and asked, Director Zhao, is there any difficulty?

No difficulty, I'll send someone to get it right away! Zhao Chengming replied.

Zhang Zhenbei has spoken in person, so there must be no difficulty.

After a while, the workshop workers carried over a bucket of platen glue, and the words Qinghe No. 2 Chemical Plant were printed on the bucket.

Chen Jiade stepped forward, first smelled it with his nose, then dipped his hand in the platen glue, observed it carefully for a while, and took out a handkerchief to test the quality of the platen glue.

Finally, Chen Jiade said: This is not the platen glue that was used before! Director Zhao, have you replaced the platen glue?

In front of so many people, Zhao Chengming couldn't lie, so he nodded helplessly and replied, Our factory recently replaced the platen glue!

In a word, the case is solved!