Chapter 28 Shocked Lin Qianxue

In the previous life, after Li Xiaofan and Haneda Haruma became acquainted, Haneda Haruma often said that he was a descendant of Qin warriors after drinking. Because in the history of Japan, there was indeed a prime minister from their Haneda family, Haneda Tsutomu, who publicly admitted that he was a descendant of Qin Shihuang.

Before taking office, Haneda Tsutomu, the Japanese Prime Minister elected in April 1994, publicly admitted that he was a descendant of Qin Shihuang, the first emperor of China. This shocked many people, including the Japanese. He said that his ancestor's surname was Qin, and it was changed to "Heda" 200 years ago. In Japanese, Qin and Haneda have the same pronunciation. He said that he was a descendant of an attendant of Xu Fu who led 3,000 boys and girls from China to Fuso. In other words, the prime minister admitted that he had Chinese ancestry, but he was driven out of office a few days after taking office.

Li Xiaofan explained slowly in English: "Mr. Haneda Haruma, I am Li Xiaofan, an employee of the electrical test workshop. Our workshop director Miss Lin Qianxue said that you will come to give us training today. I just saw the toolbox you carried with the words TAIYO Electrician on it, so I guess you are Mr. Haneda Haruma from Tokyo!"

Haneda Haruma felt very comfortable with Li Xiaofan's speed and tone: "Oh, so that's the case, great!"

After Li Xiaofan helped Haneda Haruma register at the gate, he accompanied him into the factory.

When passing by the parking lot, a girl happened to get off a red bridge car and shouted to them: "Morning, Haneda (Haneda) さん!"

"Morning, Lin-san!"

It turned out that the girl who got off the car was Li Xiaofan's workshop director Lin Qianxue. She didn't expect Haneda Haruma to come so early. Last year, when Lin Qianxue took people to Tokyo for training, Haneda Haruma was the main companion, so they were very familiar with each other.

After saying hello, Lin Qianxue asked curiously: "Li Xiaofan, do you know Mr. Haneda?"

"I just met him at the security guard!" Li Xiaofan laughed.

Lin Qianxue teased in Chinese: "You two are still communicating happily. Can you understand this old man's English?"

"Haha, no problem. I learned a little Japanese in China before..."

Li Xiaofan did learn a little Japanese. Before coming to Singapore, there was a craze for going abroad in China in the 1990s. The TV series "Beijingers in New York" and "Shanghainese in Tokyo" that reflected Chinese people studying and working abroad were very popular. During that time, many friends around him were scrambling to find ways to go to language schools in Japan to work and make money. Li Xiaofan also signed up to study Japanese for a while in his spare time.

As for why he came to Singapore in the end, it was because he was influenced by the Singaporean TV series "People on the Road". The beautiful, clean and modern city in the TV and the beautiful women and handsome men in Singapore deeply attracted Li Xiaofan. The heroine Xiang Yun in "People on the Road" looks very much like Weng Meiling. Before Li Xiaofan's rebirth, the new version of "Little Nyonya" was also being broadcast in China. There was an actress who had participated in both the old version of "Little Nyonya" and the new version of "Little Nyonya". She was the middle-aged Singaporean actress Xiang Yun, the heroine of "People on the Road" that year.

"I never blame fate for my mistakes, I am not afraid of the bumpy journey, I go to the place in my dreams,

I will not regret it even if I make a mistake! Life is already full of troubles, what if there is one more..."

Li Xiaofan and his friends hummed this classic lyrics and boarded the journey to Singapore...

After arriving at the electrical testing workshop, Lin Qianxue saw that several technical backbones had already arrived, including three team leaders such as Ade, Axiang, and Along.

After Haneda Haruma updated the new version of the software on the machine, Qian Ruoxue made an opening speech and introduced Haneda Haruma engineer, and then asked Haneda Haruma to start training everyone on the operating details of the new version of the software.

Haruma Haneda's Japanese-style English left a group of technical backbones confused. Fortunately, an English version of the operating instructions was sent to everyone, so everyone could roughly understand what was going on.

At that time, the traditional SMT patch process was improved. In terms of design, a copper positioning circle was usually set on the circuit board PCB as a positioning standard for subsequent device welding and circuit cutting. This copper positioning circle is also called a reference point or mark point, which provides a common measurable point for all steps in the assembly process, ensuring that each device used in the assembly can accurately locate the circuit pattern.

The second-generation TAIYO test machine uses this principle and for the first time uses four cameras on the upper and lower sides to align the positioning circle for the positioning of the upper and lower test molds.

The old generation of machines used manual positioning PINs to manually operate the positioning of the upper and lower test molds.

This machine is advanced, but when the printed circuit board is screen-printed, there are some errors in each batch. The first-generation camera is prone to reading errors, and the machine sometimes crashes when encountering some special situations. Moreover, after using the camera for positioning, the new test fixture is completely different from the original first generation and needs to be redesigned and produced. In the electrical test workshop of Ximu Electronics Factory, there is a special team responsible for designing, making and repairing fixtures. Because there are not many people, they are combined with the error correction team and are all under the jurisdiction of Lin Qianxue.

Although the second-generation machine is advanced, it has brought a lot of trouble to the test workshop and is in the most difficult running-in period.

However, the application of this second-generation machine in the electrical test workshop of Ximu Electronics was also promoted by Lin Qianxue himself, and it can only succeed and not fail!

After the system upgrade, the first truck of 400 Philips circuit boards was debugged and operated by Lin Qianxue and Haneda Haruma. It ran very smoothly. The test was completed in 25 minutes. The efficiency is that of a first-generation machine. Double.

The second car was the control panel circuit board of GM Deco. Lin Qianxue asked Aaron, the team leader of the third shift, to operate it. It went very smoothly. Five hundred boards were completed in half an hour.

The third truck delivered Western Digital's hard drive circuit board. It was the largest type that everyone saw. It was not only thin but also had a strange shape, and the probes needed to be particularly thin.

"Adé, come and try these boards!" Lin Qianxue said to Adé, the leader of the first class.

"good!"

When Ade went to the mold warehouse next door to pick up the molds, Lin Qianxue saw that the previous system was running smoothly after the upgrade, so she said to Haruma Haneda: "Haneda, thank you for your hard work. Let's go to the office to take a rest and chat with the boss of our engineering department. Let’s talk about future orders! ”

"Okay, thank you!"

Half an hour later, when Lin Qianxue and Haneda Haruma returned to the workshop, they found that the machine was stopped and the red fault light was on. Ade was sweating profusely. He touched the mold for a while and the operation screen for a while, like a hot pot. Ant.

"Ade, what's going on?" Lin Qianxue asked in shock.

"Officer, this machine keeps making mistakes, the probes are all crooked, and the error reports are all false! No matter how you debug it, it doesn't work. Everyone says that this new machine is not easy to use. Let us operate the first-generation machine. Once you get used to it, it will be easy. !”

Lin Qianxue was a little angry when she heard this, and rolled her eyes at Ade: "Is it the machine that's incompetent, or are you people incompetent?"

"Haneda, could you please help me take a look at what's going on?" Lin Qianxue requested.

"OK, let me take a look!"

…

After more than twenty minutes, Haneda Haruma and Lin Qianxue debugged it together for a while, but they still couldn't figure it out.

When this batch of hard drive circuit boards from Western Digital WD were screen printed, for some reason, they were tilted and rotated. A lot of ink covered the solder joints. The four most critical positioning circles were displaced, and they were displaced. The directions are also inconsistent, making the upper and lower cameras very busy. The camera was pointed up and down, but misaligned left and right. But the left and right are aligned, and the up and down are misaligned.

A De, who was standing by, whispered to everyone: "As you can see, it's not that we are not good at it, it's really that this machine is not good at it!"

In the end, even Lin Qianxue and Haneda Haruma were a little discouraged. Lin Qianxue said: "It seems that it may be a problem with the board. These WD boards are not suitable for running on the new machine..."

At this time, the tea break bell rang. Lin Qianxue looked at Li Xiaofan who was smiling and said to Li Xiaofan angrily:

"Li Xiaofan, after the tea break, we will replace the board with a new model and you will be responsible for running this machine!"

"Okay, got it!"

…

At around ten o'clock, when Lin Qianxue and Haneda Haruma returned to the electrical testing workshop after drinking coffee, they saw that the second-generation test machine was running smoothly. The circuit boards running on it were actually the same batch of hard disk circuit boards from Western Digital WD. , this group that even Lin Qianxue and Haneda Haruma couldn't handle.

Lin Qianxue and Haruma Haneda were stunned as they looked at the circuit boards sent off the conveyor belt one by one after testing "PASS".

"Li Xiaofan, you did it?" Lin Qianxue said in shock.