Chapter 13 Reorganization and Training
Will the entire factory suspend production, will it have a big impact?
It seems to have a big impact, but in fact it has little impact.
In normal times, the operating rate is actually very low, and the production efficiency is appallingly low.
Because the production targets for a year are just those!
It is no exaggeration to say that it is less than 10% of the planning and design indicators.
Normally, everyone seems to be working every day, but in fact they are just fishing and working hard!
Not to mention just suspending production for a few days, even if we really suspend production for a month, there will be no problem.
Workers are undergoing training.
On the one hand, it is ideological mobilization, so that everyone can change the past concept and style of eating from a big pot and not caring about good or bad.
On the one hand, it is to introduce a production quality system, set up technicians responsible for quality, strictly control production quality, and strictly abide by the scrapping of unqualified products and the discontinuation of molds that do not meet quality requirements. Production must strictly follow the drawings, and materials must strictly follow the requirements and are not allowed to be left unused. Materials, any process strictly follows the three procedures of initial inspection, process inspection and final inspection.
On the one hand, after communicating with Wang Tiezhu and other leaders to reach a consensus, Liu Tao decided to re-create the production model. Instead of assembling everything by one person as in the past, it would be an assembly line operation.
Liu Tao spends most of his time and energy on the inspection and maintenance of machines.
My family knows my own business.
Technicians in the technical department can solve some small problems, but they cannot solve more complicated problems.
Liu Tao had a system, so he did it himself.
He led three technicians to inspect and repair each machine one by one.
The first thing to start was the machines in the two workshops that produce pistols and automatic rifles.
Boring machines, stamping machines
Every night, even when it's time to rest, Liu Tao is still busy.
As for Liu Tao's busyness, everyone saw it. Seeing Liu Tao repairing one machine after another, everyone was speechless.
Even the broken calipers and meter sticks were replaced, and even the grinding tools were remade.
The machines in the pistol production workshop were the first to be repaired and the first to resume production.
The entire production workshop is very different from before.
The entire production workshop has become much cleaner.
Workshop, trial production begins.
In the trial production stage, there is no requirement for how fast the production is, but that the production must meet the requirements of the production quality system, produce qualified pistols, and improve the quality rate.
Production quality technical specialists monitor the entire process, and they are responsible for personally testing the produced pistols.
Testing the gun is very simple, just shoot three magazines from each gun and there will be no problems.
This is the final inspection!
The process inspection is to continuously conduct random inspections on the dimensions of parts and components, and conduct random inspections during assembly.
At the beginning, the work efficiency of the production workshop was indeed not as good as before. But within just a few days, my work efficiency was the same as before.
As for the changes in the production workshop, everyone saw them and were immediately convinced without any doubts.
range.
Liu Tao held a rifle and was testing it himself.
This is a Type 63 automatic rifle that he made himself.
Seeing that the machines in the production workshop were about to be repaired and the training of workers was on track, he began to focus on the Type 63 automatic rifle.
He aimed at the target and pulled the trigger.
"Bang!" "Bang!" "Bang!"
The muzzle of the gun instantly spurted out a fire snake, and a series of crisp gunshots sounded.
Soon, a magazine of 20 rounds was empty.
"The recoil is still relatively large, and the design of this gun itself has many problems." Liu Tao commented.
The Type 63 automatic rifle is an improvement based on the 56 semi-automatic rifle. It is also the first rifle independently developed by China. The total gun length is 1342 mm (bayonet open), 1032 mm (bayonet folded), the total gun width is 68 mm, the total gun weight is 3.87 kg (including an empty magazine and purge bar), the barrel length is 520 mm, and the caliber is 7.62 mm. The magazine capacity is 20 rounds (4 for each gun), and the lifespan is 10,000 rounds (the original lifespan is 15,000 rounds).
Looking at the virtual panel:
[Item: Type 63]
[Manufacturer: Liu Tao]
[Item level: LV1 (30/10) (can be upgraded)]
[Upgrade points: 2]
[Item status: intact, parsable]
"Upgrade! Improve accuracy." Liu Tao muttered silently.
The Type 63 automatic rifle has two important shortcomings. One main reason is that the shooting accuracy is not high, and the target is often missed when shooting. Another reason is that the Type 63 rifle is prone to malfunction.
This flaw is fatal. If the gun cannot be used during a battle, it will be a big trouble.
It is precisely because of this that the Type 63 automatic rifle is even complained by soldiers that it is not as easy to use as the 56 semi-automatic rifle. This sentence comes up.
Liu Tao was the first to solve the problem of accuracy.
To be honest, Liu Tao is not surprised at all that there are fundamental problems with the Type 63 automatic rifle.
At that time, the people across the country were working hard to "fight for the upper reaches", launch satellites, and create miracles. The national defense science and technology community also followed the upsurge and started to work on "one day equals 20 years." The Type 63 automatic rifle was started under this background. developed.
It's normal to have problems.
No problem, that’s the heck of it!
A faint light flickered, and the rifle in his hand seemed to have changed, but also seemed to remain unchanged.
Liu Tao looked at the data of the rifle: [Item Level: LV2 (20/100)]
Replaced the magazine and fired again.
The changes in the upgrade are still obvious. This time I fired a magazine, and more bullets hit the target 200 meters away.
boom! boom! boom! ~~
The trigger was pulled, the fire snake sprayed out, and a series of crisp gunshots sounded.
After burning all the bullets in three magazines, Liu Tao loaded bullets into four magazines again.
There are at least tens of millions of this kind of bullets in the warehouse of Panshan Machinery Factory. No matter how hard you hit Liu Tao, you won't feel distressed.
He filled the magazines one bullet at a time, and soon all four magazines were filled with bullets.
boom! boom! boom! ~~
The trigger was pulled again and the gun was fired.
One advantage of this automatic rifle is that it shoots faster than a pistol.
Soon, all four magazines were empty.
Liu Tao looked at the data again: [Item level: LV2 (150/100) (upgradeable)]
"Upgrade! Stability!"
This time, Liu Tao chose to upgrade in the direction of stability.
For a gun to be called a good gun, stability is absolutely very important. It can stably exert the performance of the gun in the respective environment.
Suddenly, Liu Tao seemed to see a faint light flashing from the gun body, and then disappeared in an instant.
The Type 63 rifle in my hand seemed to have changed, but when I looked again, there was no change.
But the data on the virtual panel clearly shows: [Item Level: LV3 (50/1000)].
After solving these two problems, it can be said that if the current rifle is produced, it can be delivered to the troops, and the troops will most likely be satisfied.
However, Liu Tao is not satisfied with this.
The fact that the troops are willing to accept it only means that the previous things can be revealed, but it does not mean that the production tasks of Panshan Machinery Factory can be increased.
If you want to obtain production quotas, the simplest thing is to produce a product that makes the troops very satisfied and the soldiers are full of praise.
Therefore, this gun must continue to be improved.
