Chapter 9 Repairing Boring Machines
"Can we produce a batch of this pistol first?" Wang Tiezhu looked at Wang Baoguo with bright eyes.
What is produced cannot be produced at will, everything must be according to plan.
Only when there are planned indicators can we produce.
If the above did not give Panshan Machinery Factory quota, then the products produced by Panshan Machinery Factory would at most be equipped for the factory's garrison.
The security force of a platoon is only 30 people!
30 brand new pistols are simply not enough to satisfy Wang Tiezhu's appetite.
Wang Baoguo looked thoughtful.
"In this way, you will produce 500 of these pistols first, and the cadres of the 40th Division will be equipped first." Wang Baoguo said.
The 40th Division is Wang Baoguo's old unit, and the 119th Regiment is also stationed in this mountain, guarding the Panshan Machinery Factory.
To attack Panshan Machinery Factory, we must first break through the defense line of the 119th Regiment.
The 40th Division has a total of 17,000 people and 500 new pistols, which can almost equip all platoon-level cadres of the 40th Division with the new pistols.
Wang Tiezhu showed joy.
500 pistols, this is an additional planning indicator.
Moreover, Wang Baoguo's words also awakened him. He could also find old army leaders and ask them to be equipped with new pistols.
His old unit was the 41st Division.
As long as it is loved by soldiers in the army, this new pistol can be promoted quickly.
No matter what happens, the entire military region will support replacement.
The next day, Wang Baoguo and others left.
Wang Tiezhu began to arrange the production of this new pistol.
The original Type 54 pistol production workshop no longer produces Type 54 pistols at this time.
Technicians from the technical department are instructing the production of brand new pistols.
But at this time, the single-axis barrel drilling and boring machine got emotional and went on strike.
The single-axis barrel drilling and boring machine is a special machine tool specially used to process gun barrels. It mainly performs drilling and reaming of gun barrels. It is a high-precision machine tool.
Lin Shengli scolded his mother: "This master's machine tool is like a person who is old, his whole body is full of problems, and he gets sick at every turn."
"Minister Lin, how many years has this boring machine been used?" Liu Tao asked.
"This machine tool was imported from the Soviet Union in 1955. Counting from the time of import, it is now 23 years ago. And it is not a brand-new machine tool, it is a second-hand machine tool. Who knows whether it was 30 or 40 years ago after it was manufactured. "Minister Lin said.
Even if it is 23 years old, it is definitely considered an old machine tool.
"Minister Lin, let me check this boring machine." Liu Tao volunteered.
"Comrade Liu Tao, can you repair a boring machine?" Lin Shengli had doubts in his eyes.
"I studied some classes at school and read some books in the library." Liu Tao said without blushing or heartbeat.
In fact, his biggest reliance is the system!
"Okay, come and take a look." Lin Shengli said.
Liu Tao approached and touched the boring machine, and the virtual panel changed:
[Item: Single-axis barrel drilling and boring machine]
[Manufacturer: James]
[Item level: LV1 (0/10) (cannot be upgraded)]
[Upgrade points: 0]
[Item status: old (faulty), resolvable]
Not upgradeable! ?
Liu Tao was not surprised when he saw the mark.
The items that can be upgraded by the system must be items made by him.
What really surprised Liu Tao was that the name of the manufacturer did not look like a Soviet name at first glance, but looked like an American name.
"Could it be that this machine tool was imported by the Soviet Union from the United States?" Liu Tao secretly guessed.
This speculation is not unfounded.
In 1929, an economic crisis broke out in the United States. This economic crisis quickly swept through the world's major capital countries. Taking advantage of this rare opportunity, the Soviet Union bought many good things at low prices.
It is not impossible that this machine tool was imported at that time.
If it is true as Liu Tao guessed, then this boring machine may have been born half a century ago.
"Replace the screws and oil. I wonder if I can get upgrade points?" Liu Tao secretly thought.
If you want to analyze it, you must have an upgrade point.
Without upgrade points, Liu Tao couldn't analyze it at all.
Thinking about it, Liu Tao picked up the wrench, tapped it with the left hand, and smeared it with lubricating oil.
Ten minutes later, Liu Tao discovered that the virtual panel had changed again: [Upgrade point: 1]
"System, analyze!" Liu Tao thought silently in his heart.
"Please select the analysis direction." The system voice sounded in Liu Tao's mind.
Liu Tao quickly understood that this analysis also has different directions, analyzing the cause of the failure and analyzing the old points.
"Analyze the cause of the fault." Liu Tao muttered silently.
As Liu Tao selected the analysis direction, a three-dimensional diagram of the boring machine appeared on the virtual panel. The three-dimensional icon was marked with twenty red dots. These red dots were all faults, causing the boring machine to fail to work.
Each red dot has a corresponding description.
"The screw is loose." Liu Tao saw a red dot, then followed the three-dimensional diagram to find the corresponding screw of the boring machine, picked up the wrench and tightened the screw.
As this screw is tightened, the red dot disappears.
"Grease Special 5, you should choose Grease Special 7." Liu Tao frowned slightly when he saw a red dot.
"Come on, dismantle the moving parts and clean off the grease." Liu Tao said to his two colleagues.
"Why? I just applied this grease ten days ago." A colleague asked in confusion.
"Yes, Comrade Liu Tao, look at this grease. It can still be used for a long time. It cannot be wasted." Lin Shengli said.
"Minister Lin, for high-speed moving parts like this, we should not use special 5 grease, but special 7 grease." Liu Tao explained: "Although they are all greases, different types have different functions." "For high-speed moving parts like this, there is a lot of heat when running at high speed, and the heat dissipation of grease is very poor. If too much is added, the temperature of the machine parts will be too high. Just apply a thin layer of special 7 grease." Liu Tao said. Lin Shengli frowned slightly, but finally chose to trust Liu Tao. Soon, the moving parts were taken off, and then the special 5 grease was cleaned with a cloth, a thin layer of special 7 grease was applied, and then the parts were reinstalled. Liu Tao also solved those marked with red dots. Then, Liu Tao said: "Come on, try now, can you start it." The boring machine started smoothly. "Awesome! So awesome!"
"I didn't expect Comrade Liu Tao to not only design guns, but also repair boring machines, awesome!"
"Why didn't you call Comrade Liu Tao before? Alas, it broke down again a few days after it was repaired."
The workers in the production workshop were full of admiration.
You know, this boring machine has broken down more than once or twice.
The technicians from the technical department came to check and repair it, and it broke down again a few days after it was used.
Now Liu Tao can not only find out the cause, but also tell what caused it and solve it.
In the past, maintenance personnel only knew how to use grease, but they didn't know whether it was Special 5 or Special 7.
Every time they applied grease, they wanted to apply as much as possible.
Liu Tao's face flushed slightly when he heard the workers' praise.
How could he be so awesome? In fact, he knew nine out of ten things about machine tools - nothing at all!
The reason why he could find these problems and solve them was because he had a system and solved them through system analysis.
