Chapter 2360: Shocking new alloy!

“Really a new alloy?!”

As the professor looked at the calculations on the paper, he secretly calculated it. He found that the above is the characteristics of several common metal materials, but if the alloy technology is used, these metal materials are true. Suitable for alloying.

And look at the steps and formulas of the above calculations, which are calculated according to the direction of the alloy!

just……

What kind of alloy is this?

Professor Yu has some doubts, although several materials on this paper are very common, but if the process is different, the properties of the finished alloy will vary widely.

Even if there is no suitable match, although the alloy can be manufactured in the end, the performance of the alloy may not be as good as the most common metal.

So the key is to see how these materials are matched, and the process of making alloys is especially important.

Yu Professor was immersed in contemplation. According to the researcher’s thinking, it is clear that he already has a mature idea. Otherwise, it is impossible to get the laboratory to test it. Because a new type of alloy must first In the deduction of the effort, that is to say, at least in theory, it must be able to work, and then can enter the experiment and verify.

The problem is that this paper doesn't even write how to make it. It just lists some formulas and principles, but there are no further things, nothing left. The rest are things that are like ghosts, or they are Some are just like swearing, they don't understand at all.

Yu’s curiosity was hooked up. He subconsciously lit a cigarette and sat there seriously thinking about it. According to the ideas on this paper, he constantly made his mind.

Gradually, the professor’s look became dignified, because he found that the materials listed on this paper each had their own unique advantages, and if they could take advantage of these materials When it comes out and is successfully made into an alloy, the performance of this new alloy is absolutely terrifying.

At least, Professor Yu can't think of any alloy in the world that is comparable to this new alloy!

But the question is, how can we bring out the performance of these materials and successfully integrate them into new alloys?

This is the biggest problem!

At the same time, this is the most difficult problem in the field of alloy manufacturing.

Because the material properties of each metal are almost universally known, for example, a metal may have the best thermal conductivity, and a certain metal strength is far ahead of other metals, which is well known.

The key is difficult, how to make these properties are integrated in the same alloy, and can be fully highlighted.

This is also the so-called core technology!

What Professor Yu wants to know most now is what the meaning of the symbol in the lower part of the paper is like a ghost-like symbol. The researcher who wrote this paper is pulling it by hand, or that these symbols represent some kind of What do you mean?

Professor Yu thought of many possibilities, such as the characteristics of the metals on the periodic table, the arrangement, etc., but he was disappointed to find that none of his guesses could match the weird symbols in front of him. .

"What do these symbols represent?" Professor Yu was full of doubts.

"Ding……"

A crisp sound sounded like a metal collision, letting the professor suddenly come back from the meditation, looking up, and seeing one of his students was using a broom to clean it from the lab bench. That pile of debris, cleaned in the trash.

And one of the ordinary things of the steel ball fell from the pile of debris and rolled on the ground. The crisp sound just now was that the little thing was lying on the ground.

The little thing just happened to be in front of the professor. He slammed his hand and shook his head slightly. He folded the piece of paper in his hand and put it in his pocket. He subconsciously felt that what was recorded on this piece of paper. It seems to be very valuable. Perhaps, he also wants to understand what the odd characters of ghosts are.

"teacher……"

A student came over with a garbage bag and gestured to the professor to throw the little steel ball into it.

Professor Yu raised his hand and just wanted to throw the little thing away, but suddenly he stopped in the air, his eyes fixed on the small steel ball.

"babble?"

After seeing the professor for a moment, he couldn’t help but screamed in surprise. Then he immediately took the little steel ball to his own eyes and observed it himself: "Some strange..."

The student asked inexplicably: "Teacher, what happened?"

Yu Professor’s words were waved, and his eyes were still on the little steel ball in his hand. He said to himself: “It’s weird, it’s a metal, how is it so light?”

Yes, what surprised Professor is that the small ball in his hand has almost the size of a small steel ball. It can only be found after the professor took it in his hand. This thing is simply light and nothing, just like plastic beans, light almost People are not aware of the things they are holding in their hands.

“A little weird!”

Professor Yu said to himself: "Is it a new material?"

Thinking of this, he looked up and asked, "Where did this come from?"

Although the student was strange in his heart, he did not ask much, saying: "I don't know too well, maybe it's on the workbench..."

Professor Yu suddenly couldn't help but feel the heart, because he remembered the piece of paper he had just seen.

"The debris should not be cleaned up first, and don't be lost!" Professor Yu suddenly said, "Be sure to put it aside, be careful not to disperse it... Also, immediately turn on the device and check what metal this little thing is! ”

"Yes!"

The student nodded immediately.

There is some faint expectation in the professor's heart, and he has a hope.

Soon, the equipment needed for the inspection was all ready. The professor did not personally hand it, but gave the little thing to the students to test. Even if he had some expectations in his heart, the students could do well. This is also an opportunity to exercise them.

As a mentor, Professor Yu is naturally very competent.

According to the test operation habits, several students first observed the small ball and then observed it under a special microscope. This is the first step of observation, which surprised several students.

"babble?"

"this is……"

"Is it wrong? How could this be?"

A few students suddenly talked about it strangely.

Professor Yu immediately asked: "What happened?"

One of the students replied: "Teacher, this thing is a bit... strange."

"Oh?"

In the spirit of the professor, he asked: "What a strange method?"

The student said: "Teacher, this little thing looks very light, but the internal material structure is extremely tight. Although I don't know how other molecular structures are, I don't know the physical structure. It's such a tight structure. I think it's almost as good as some high-strength metals."

As a result of Professor’s heart, “Continue to test!”

A few students were busy at the beginning, but at the sampling stage, they encountered difficulties because they could not cut the ball even a star or a half, even in extremely high temperatures, using the equipment in the laboratory. Almost nothing has changed.

When Professor Yu saw this situation, his expectations were even greater. He said: "Corrosion with strong acid, chemical analysis!"

However, the result is that these students are even more surprised, because they can not corrode the surface of the ball with strong acid, let alone test.

In desperation, they had to go to the equipment first, and carry out various scanning analysis on the ball.

Under the gaze of the professor, several students tossed for a long time, until the sky darkened, and the laboratory management staff reminded them that they had made a preliminary analysis, got the analysis map and other results. .

Several students were shocked when they saw the test results.

"alloy?!"

A few students were shocked, but could not help but face each other, this small ball, turned out to be an alloy?

This is too much for everyone's expectations.

You know, even the most stable alloys that are currently known, it is impossible for them to use so many inspection methods without any help!

This alloy is also... too stable?

Is this an alloy? It is said to be a new type of new metal that is sturdy and stable to the extreme, and they will never have any opinions.

But this analysis map clearly shows that this is an alloy with several metal components, and they all occupy a certain amount.

“Enter the map into the database and compare it with the map of all the alloys!” Professor Yu immediately told him that he didn’t even know when to stand up from the chair.

"Yes."

A student follows the instructions to quickly operate.

The result came out - the conclusion is that there is no comparison result.

"really!"

Like the students, when the professor saw the test results, it was also particularly shocking, but in shock, he had an inexplicable excitement, because he can be sure that this is definitely a brand new alloy. .

Because there is no comparison result in the database, this means that this is definitely not any alloy known now, but a new alloy type!

More importantly, this new alloy, not to mention its performance, just for this hardness and stability, is enough to make any other alloy can not be expected!

As for other metals... it’s even more worth mentioning!

Although it is not known how other properties of this alloy, such as thermal conductivity and electrical conductivity, are just based on hardness and stability, it is enough to stand out in the alloy industry!

"major discovery!"

Professor Yu is excited and hard to make.

......